Jump to content
SAU Community

Recommended Posts

Hello

My rb25 turbo on my rb20det is about gone.

I am looking for a new turbo.

I learned abit more about turbos and things now.

Whatever turbo I buy will be transferrerd over to a rb25 engine if I decide to buy one later this year.

I am looking at a TD05 18g, Hi Flow rb25 turbo(Hyper Gear), a GTX2860R, GTX2863R, GTX2867R, or a GTX 3071R.

I want 400hp but I want to learn how to drive on a car with over 300 first since I have never drive on that goes over 300hp. Don't want any more used rb25 turbos.

My set up now is cool and I have learned how to drive on it, I pushed it to its limits and its old so now its making that death winding sound.

Set up now is the rb25 with a tune which is tuned for boost up, intake pod, and the bigger turbo, fuel, etc.. My boost is set at .9 bar. I have full exhaust from the turbo back with a sports cat. 3" to 5" full exhaust. I am running a gtr pump which is going too, showing signs of dying. Buying a tomei, or walbaro pump within the week. I am running stock injectors. Plan is to get 440cc or 550cc injectors, new turbo, new fuel pump and tune. Not looking for more than 350hp for now until I learn how to drive the car with that much horse power.

Want good response of course.

I have read thru many of the results posted by people with different turbos but there is not much on the ones I mentioned above except for the hi flow rb25 turbo. The results from that seems that the turbo does really get moving until after 3000 rpm almost 4000 on the rb20.

Which of those turbos listed above would be good to have and still a good one to put onto a rb25?

Are there any that I am missing that might be good/

Edited by yoshiii335

Nothing that will be good on an RB25 will feel good on a 20. Lag on the 20 where it will boost fine on the 25. Or, boost fine on the 20 and then choke the 25.

Be prepared to buy a different turbo for the 25. That simple.

Ok.

So which one of the turbos for the 20 is good?

might get away with the 3071, but need a smaller exhaust housing for the 20 and then upgrade with larger for the 25??

but tbh the hi flow is a good option, bit cheaper and when u go 25 u will be able to sell it and hi flow another one suited to a 25

sell rb20, buy rb25 slap a hypergear turbo on and win :)

but from your given choice.. best bet would be the hi flowed u21 from hypergear.. gives the best response and decent power on the 25, theoretticly would suit your 20 better? so that would be my pick plus you can sell it once your done with it since everyone is always after hi flows for the basic upgrade

sell rb20, buy rb25 slap a hypergear turbo on and win :)

but from your given choice.. best bet would be the hi flowed u21 from hypergear.. gives the best response and decent power on the 25, theoretticly would suit your 20 better? so that would be my pick plus you can sell it once your done with it since everyone is always after hi flows for the basic upgrade

The results I have seen of people using the high flow 25 on a 20 doesn't look so impressive, most of the power seems to come on in the later rpm range.

My turbo now is on its way out, used to make a whirling noise when winding up but now it makes a more low growling type sound and is super quiet compared to before. The turbo is old and it has been thru three cars so its probably time.

I caned the car this weekend, as I learned about this slang today. I am already having problems with my car's fuel pump and other things from the caning I did this weekend so things to change

Edited by yoshiii335

it performs mental on a SR20DET non-VCT

so I can assume a RB20 will perform a little worse but still ok..

Let's get real, you want less lag and decent power? then a RB20 is not the answer.... even a B18C Honda motor with a turbo strapped to it makes more torque, more power, and provides better low down than a RB20.

And let's also be honest. This line of questioning has gone on for many months now. Surely you have saved up enough money to just do the whole RB25 + gearbox + diff + suspension + brakes + intercooler + turbo + ECU + tune + rear-vision-mirror-air-freshener upgrades you've been talking about.

And let's also be honest. This line of questioning has gone on for many months now. Surely you have saved up enough money to just do the whole RB25 + gearbox + diff + suspension + brakes + intercooler + turbo + ECU + tune + rear-vision-mirror-air-freshener upgrades you've been talking about.

Not yet, done some not saved for all

Edited by yoshiii335

Not sure about the technical side but i reckon RB30 motor and RB25head would be cheaper than buying the whole RB25... it really is pretty simple to do then i agree with the sutututu guy above lol...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...