Jump to content
SAU Community

Recommended Posts

Hi. Guys not only from reading over the past years have i came up with learning some things you have to change when it comes to making some good power from rb26 motors or the whole line up of rb series motors. But i would like to see if im on the right track or even missed a few things. Please bare with me as i might have these in the wrong order.

Im doing 2 build at the moment and also would really appreciate good advice. I would like to say thanks from now.

First of long time ago i came across the oil problems from crank collar to block oil restriction and larger sump to head drain, even driling the return holes larger.

Also from a stock stand point weak ring landings, stock turbo limitations,

Even after endless amounts of money and time im now learning that these motors also can brake valve guides at high rmps.

Im hoping we can go over some few points im taking to do my new builds.

Im going to change every damn thing in the motor that changeable. Lol. What i would like to know and some would say just do it is. The buckets in the heads i see that there available from Tomei but are they necessary, what are some benefits of doing it, if any. Here is what i plan on doing.

I want a good steer/drag build of about 750whp.

The motor.

New head sent to port flow and design in CA to have all the work done to the head.

As of now i have BC giudes, supertech STD valve, supertech dual valve spring 92 seat pressure, have no idea on what cam specs to go with, or to change buckets. New timing belt, N1 Water pump, greddy oil pump, custom head drain, Racefab sump, CP pistons upgraded pins. 20 over pistions running 8tho ring gap, piston to wall clearance will be 3 to 4 tho. All ARP head and main studs, ACL race bearings, new oem nissan crank shafts. Manley rods with + 625 bolts. im also planning on having port flow and design just polish up the head and make bowls clean. Turbo is a gtx3582r t4 twin scroll using dual 38mm tial gates with 6 boost manifold. Running power fc with 800 cc injectors but will uograde later. Duel intank e85 450 walbro pumps. (F90000267) along with a apexi head gasket 1.5mm at 87mm bore size.

Thats about l all i can think of i hope i didn't miss anything. Im also doing another build right after this one but 1mm over valves by suptech all the same, just a Tomei oil pump.

I would really appreciate any advice you guys may have. I hope to get a reliable rb motor this time. Damn talk about being loyal to skylines and rb's.

Link to comment
https://www.sau.com.au/forums/topic/465269-guide-lines-of-a-reliable-build/
Share on other sites

Reliable and 750+ requires cash and a reasonable amount of it. If you want the ultimate in reliability then dry sump it, do all the cooling system mods with an electric water pump set up with a variable speed controller and post cooling. Once you see the cost of that come back and talk engine componentry, cylinder head builds and drivetrain components

Reliable and 750+ requires cash and a reasonable amount of it. If you want the ultimate in reliability then dry sump it, do all the cooling system mods with an electric water pump set up with a variable speed controller and post cooling. Once you see the cost of that come back and talk engine componentry, cylinder head builds and drivetrain components

Damn im suprised that you cant get 750 from a RB26. looks like ill be saying good bye RB's Always had it in the back of my head. Time for some good old v8's thanks mate. RB's = waste of money. Ill waste it one more time.

Damn im suprised that you cant get 750 from a RB26. looks like ill be saying good bye RB's Always had it in the back of my head. Time for some good old v8's thanks mate. RB's = waste of money. Ill waste it one more time.

Well reliably. Speaking

You asked, i spoke. Take it how you want to. Plenty of people will kick up and say " oohh, i have 750hp and have had for years" but how many actual thrashings do they get? If you build a car like these things, you are going to want to thrash the snot out of it and do it with peace of mind. Well m i do anyway.

What is meant by "steer/drag build"? Circuit and drag?

From the details you give about engine specs it looks like you have good mechanical strength and all the supporting mods for power. As long as it has been put together right it shouldn't give you trouble. You can have the most bulletproof engine setup mechanically but it means nothing without a good tune. A tune can make or break any engine.

What is being done on the ecu and tuning side of things?

Ok lets relook at this abit. I dont mind change to another ecu, or even changing to a better intake.

What power level would be very reliable for a rb26. Keeping in mind i want to retain a wet sump. Maybe later a dry sump setup in another car. This car is ment for street and occasional drag passes.

What you you guys think about supertech dual valve springs. and TI retainers. 92lb seat pressure??

Hmm your going to want a different spec motor for "drag racing" to circuit n street. If u just want it to be quick in a straight line get at least 270 degree cams. But if u want it for track n street as well I'd make it at least a 2.8L since your replacing the crank rods n Pistons anyways. I saved a few K when I built mine n stuck with a 2.6L but it has 270degree cams n -5 turbos so is a bit laggy. Makes 550hp on E85 n seems reasonably reliable (for a Gtr, every Gtr owner also needs a diesel hilux so they can still get to work lol) bn told around 500hp is about the reliability level for the 33gtr drivetrain ( depending how much abuse it of course)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
×
×
  • Create New...