Jump to content
SAU Community

Shockworks Presents Round 9 - Sandown Raceway 1st Oct | Grand Final Day


Recommended Posts

1 minute ago, acsplit said:

Next 10 days or so, what would you like to know?

Cheers. I've got an older helmet with the date worn off and scrutineers are sometimes a little iffy about it.
I know that there's recent rule changes for fire extinguisher dates, what's the go with helmets?

52 minutes ago, V28VX37 said:

Cheers. I've got an older helmet with the date worn off and scrutineers are sometimes a little iffy about it.
I know that there's recent rule changes for fire extinguisher dates, what's the go with helmets?

Let me get back to you

  • Like 1

Got my spot. First time around sandown since 2009 or so when I was 19! Apart from that one drift day I went to, but we don't talk about that..

On 8/26/2016 at 0:18 PM, acsplit said:

Let me get back to you

Thanks man. If I need to get a new one the 2016 Bell Qualifier looks decent, it's ECE 22.05 Standard Certified.

The CAMS Schedule D lists under Level A Standard 'E22 (with 03, 04 or 05 amendments)' – can anyone please confirm if this is the same?

Will get some confirmation from CAMS for you.

Ok discount entries sold out! 

Get your entry in asap as the day is capped at 60 which is half the normal capacity.

  • Like 1

Ok guys here is the info on helmets and fire extinguishers

Most helmets from your local motorbike shop will pass the requirement. Which is it must have the AS/NZS 1698 sticker or greater.

However you get what you pay for, so the cheaper helmets are heavier, bulkier and hotter. I'd suggest something in $200 range, as that provides good overall value.

The fire extinguisher must be 900g or larger with a standards sticker of as1841 (not as1841.2). Which you can get from autobarn or supercheap, make sure it has a metal bracket. The date stamped on the bottle is only valid for 3 years, so get one with this years date on it. You need to 'bolt' it to the car which you can grab from here. This bracket bolts straight to the seat, without the need for drilling or cutting

  • Like 1
Ok guys here is the info on helmets and fire extinguishers

Most helmets from your local motorbike shop will pass the requirement. Which is it must have the AS/NZS 1698 sticker or greater.

However you get what you pay for, so the cheaper helmets are heavier, bulkier and hotter. I'd suggest something in $200 range, as that provides good overall value.

The fire extinguisher must be 900g or larger with a standards sticker of as1841 (not as1841.2). Which you can get from autobarn or supercheap, make sure it has a metal bracket. The date stamped on the bottle is only valid for 3 years, so get one with this years date on it. You need to 'bolt' it to the car which you can grab from here. This bracket bolts straight to the seat, without the need for drilling or cutting


Thanks! So no date requirement on the helmet?
1 hour ago, V28VX37 said:


Thanks! So no date requirement on the helmet?

No, however if you feel like your helmet could be borderline unsafe due to it's age (or if it has ever been in an impact (including dropping it on the ground)) then personally I highly recommend getting yourself a new one.

It's amazing how many people try to sneak through with dodgy things, when the restrictions are there for their own safety... The CAMS scrutineers have seen it all, so if in doubt, don't risk it.

  • Like 1
No, however if you feel like your helmet could be borderline unsafe due to it's age (or if it has ever been in an impact (including dropping it on the ground)) then personally I highly recommend getting yourself a new one.

It's amazing how many people try to sneak through with dodgy things, when the restrictions are there for their own safety... The CAMS scrutineers have seen it all, so if in doubt, don't risk it.

Fair enough. I know that a motorcycle helmet is the easiest option but where do people go for entry level Hans enabled ones in Melbourne?




  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...