Jump to content
SAU Community

Alpha Omega Racing Evo 350mm Big Brake Kit Group Buy Round 3 (WTAC rear kit available)


timmy_89
 Share

Recommended Posts

Alpha Omega Racing Evo 350mm Big Brake Kit Group Buy Round 3 (WTAC rear kit available)

Hey all,

Alpha Omega Racing are running a group buy again just in time for World Time Attack Challenge.

You may already be aware, Alpha Omega Racing have been developing adaptor kits to fit front and rear Evo Brembo’s to S/R/Z chassis for some time now. This is now the third group buy run for the brake adaptor kits, and will this time include the front adaptor kit (Version 3), rear adaptor kit, and the new WTAC edition rear adaptor kit which has been developed to meet WTAC Clubsprint rules.


 

Company:


Alpha Omega Racing


www.alphaomegaracing.com

18x10_15a.jpg

Products:


Evo 350mm Brembo Front Brake Adaptor Kit and/or Evo 350mm Brembo Rear Brake Adaptor Kit. These adaptors are 100% CNC machined billet alloy, grade 7075, which is super lightweight and high strength.

18x10_15b.jpg

What's included (front kit):


- Left and right adapters made out of one piece of 7075-T6 billet aerospace alloy


- Various high tensile 12.9 bolts and high tensile washers


- Full installation instructions with pictures

17x9_15.jpg


Front fitment with 17x9 +15

What's included (rear kit):


- Left and right adapters made out of one piece of 7075-T6 billet aerospace alloy


- Hub spacers (standard rear kit only)


- Various high tensile bolts and high tensile washers


- Full installation instructions with pictures

18x10_35b.jpg
Rear fitment with 18x10 +35

What you need to get (front kit) - B.Y.O. or supplied by Alpha Omega Racing:


- Mitsubishi Lancer Evo 5/6/7/8/9 Brembo frontcalipers(including pads/pins/shims/clip)


- Mitsubishi Lancer Evo 10 front 350x32mm rotors


- Custom brake lines

Alpha Omega Racing can supply all of the above parts, but you also have the options of sourcing them yourself. I personally sourced parts for my front kit elsewhere as I had my own lines made and picked up a cheap set of calipers. Alpha Omega Racing has these parts listed at:

- Mitsubishi Lancer Evo 5/6/7/8/9 Brembo frontcalipers (used) - $850


- Mitsubishi Lancer Evo 10front350x32mm DBA T3 rotors (new) - $470; or


- Mitsubishi Lancer Evo 10front350x32mm DBA5000 2pc (new) - $1200


- HEL custom braided brake lines (new) - $130

What you need to get (rear kit) - B.Y.O. or supplied by Alpha Omega Racing:


- Mitsubishi Lancer Evo 5/6/7/8/9 Brembo rear calipers (including pads/pins/shims/clip)


- Nissan 370Z rear 350x20mm rotors


- Custom brake lines

Again, Alpha Omega Racing can supply all of the above parts if desired. I personally sourced all parts from Alpha Omega Racing for convenience with the rear kit. Alpha Omega Racing has these parts listed at:

- Mitsubishi Lancer Evo 5/6/7/8/9 Brembo rear calipers (used) - $450


- Nissan 370Z rear 350x32mm DBA T2 rotors (new) - $450


- HEL custom braided brake lines (new) - $110

Silvia (180SX/S13/S14/S15) drivers who want a functioning handbrake will need to use the R32/R33/R34/Z32 rear drum setup, a very common upgrade.

It is also worth noting that the standard rear kit requires a 6mm hub spacer to be installed for caliper clearance, this will also push your wheel/tyre out a further 6mm so may affect guard clearances.

Alpha Omega Racing can also offer services to rebuild your used calipers, powder coat them, or even install the whole kit.

Using both the front and rear big brake kits developed by Alpha Omega will result in a 69:31 brake bias.

Wheel clearance:


Minimum of 17" race style wheels with good clearance are required.

Brake Master Cylinder:


You are able to retain your factory brake master cylinder, however it is recommended to upgrade to a brake master cylinder with a piston size of 17/16" (such as a BM57). Genuine OEM BM57 BMC’s are available from Alpha Omega Racing at a price of $500 (new), or you could also try to source from your usual Japanese parts suppliers or Nissan dealership if you desired.

 

Price:

Pricing for this group buy will be calculated per number of kits sold, not per buyer. For example, if 3 people buy a front and rear kit each, this will be calculated as 6 kits sold. Prices will be as below:

 

1-4 kits sold

- Front adapter kit for $370ea (no savings yet, group buy not activated)

- Rear adapter kit for $450ea (no savings yet, group buy not activated)

- Rear “World Time Attach Edition” adapter kit for $390ea (no savings yet, group buy not activated)

 

5-10 kits sold

- Front adapter kit for $345ea (save $25)

- Rear adapter kit for $400ea (save $50!)

- Rear “World Time Attach Edition” adapter kit for $340ea (save $50!)

 

11-15 kits sold

- Front adapter kit for $320ea (save $50!)

- Rear adapter kit for $350ea (save $100!!)

- Rear “World Time Attach Edition” adapter kit for $290ea (save $100!!)

 

16+ kits sold

- Front adapter kit for $295ea (save $75!!)

- Rear adapter kit for $300ea (save $150!!!)

- Rear “World Time Attach Edition” adapter kit for $240ea (save $150!!!)

 

Braided brake lines, rotors, calipers, bleeders, rebuilding, etc are not part of this group buy but you are welcome to order them altogether.

 

Group Buy Condition:

The group buy will run until close of business on Sunday 28th September 2016. Anybody interested in purchasing either of the kits as part of the group buy should notify me by the cut-off date and I will add them to the 'buyer list'. At the conclusion of the group buy (29th September 2016), I will tally the number of buyers and advise Alpha Omega with the total numbers. A discount ‘coupon code’ will be provided to each buyer on the 30th September 2016 allowing them to get the appropriate discount in the shopping cart on the Alpha Omega Racing website. It is expected that most orders will be placed between 3rd – 7th October 2016. Alpha Omega Racing will be closed during World Time Attack Challenge dates (10th – 14th October 2016). Upon returning to business, they will begin processing/shipping as soon as they return from their closure period for WTAC on the 17th October 2016.

 

Prior to the cut-off date all communication will be with me either via this thread or via PM. At the conclusion of the group buy, once you have been provided with the discount code, all communication will be between the buyer and Alpha Omega Racing. All shipping and payment details will be between the buyer and Alpha Omega Racing only. Any warranty on the product(s) will be provided by Alpha Omega Racing.

 

 

If you have any questions, regarding the kit or the pricing, please don't hesitate to ask either by posting in this thread or sending me a PM.

 

Cheers,

Tim

Link to comment
Share on other sites

Apologies, I also meant to include a link to the WTAC edition rear kit as there is a small modification to the caliper required for this kit to fit, due to the fact there is no hub spacer used.

http://alphaomegaracing.com/p/149/c/72/Z32/ALPHA-OMEGA/Evo-350mm-Brembo-Rear-Brake-Adapter-Kit-WTAC-Edition.html

If you have any questions about it feel free to ask here or shoot me a PM.

Link to comment
Share on other sites

OK guys so we have 9 kits currently. 2 more and we will hit the next discount bracket.

I also noticed that there was a mistake in my original post regarding dates. I said the group by would end on Sunday 28th September, obviously it is not Sunday tomorrow, just re-confirming the end date with Alpha Omega :)

Link to comment
Share on other sites

OK guys, because of the miscommunication with dates, the final day for expressions of interest in the group buy has been extended to Friday 7th October 2016. The coupon code will be distributed to all parties ASAP after this date to allow orders to be placed. Processing and shipment of orders should remain in line with Monday 17th October as originally detailed.

Link to comment
Share on other sites

5 hours ago, stranger12 said:

jsut to confirm the spacer for the rear is absolutly necessary ?

 

My wheel is 275 and I think If I use spacer it will catch the gaurd

In the 'normal' rear kit the hub spacer is necessary. There is no spacer used in the WTAC rear kit.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • The time has come once again, for another SAUNSW Sunday Session! You all know the drill by now, fam... This is the perfect event to catch up with the SAUNSW crew, hang out for a coffee and a bite to eat, and get in some photos and friendly banter! So without any ado, here are the details: Date: Sunday 14 July 2024 Meet Location: Penrith Krispy Kreme (at Penrith Panthers - Panthers Place, Mulgoa Rd, Penrith) Meet Time: 8:00am Map: https://tinyurl.com/saunsw-penrithkk  This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAUNSW event and will be run under a Motorsports Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Who's itching for another cruise...?? That's right! You are! And so are we! And what better cruise to run than an Old Pac Run!! So without any ado whatsoever, here are the details for you to save: Date: Saturday 22nd June 2024 Meet Location: Cowan Truck Stop (Pacific Motorway - Refer to Map) Meet Time: Meet at 7:00pm for a 7:30pm departure Destination: Gosford McDonald's (65 Pacific Highway, Gosford West) Map: https://www.google.com.au/maps/dir/Cowan+Rest+Area+-+Truck+Stop,+Cowan+NSW+2081/mcdonalds+gosford/@-33.5145054,151.1875996,11z/data=!4m39!4m38!1m30!1m1!1s0x6b0d50be6b302f7b:0x52a920c40b292919!2m2!1d151.1590113!2d-33.6115097!3m4!1m2!1d151.1632842!2d-33.6047898!3s0x6b0d509345312641:0xb510e358747a5332!3m4!1m2!1d151.2008176!2d-33.5274838!3s0x6b0d4e5adac43725:0x611c05fee203a98a!3m4!1m2!1d151.1925869!2d-33.4598502!3s0x6b0d4926bcb9e627:0xd95f510d7f39b402!3m4!1m2!1d151.2072744!2d-33.4523186!3s0x6b0d49138231a221:0xaf20c78b79e9db5a!3m4!1m2!1d151.2318957!2d-33.4309951!3s0x6b0d4989b4996d83:0xeae9af9b71739b59!1m5!1m1!1s0x6b0d4aaa920441e5:0x33f1be63f4680e2f!2m2!1d151.32463!2d-33.4269!3e0?entry=ttu Definitely an easy one for this cruise, meet at Cowan Truck Stop and jump straight onto Old Pacific Highway! Final stop at McDonald's which has plenty of parking all around. There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Thanks, I'll have to cobble something like sonicii did, will report back
    • Agree! I still believe I have the quietest 400kW+ R33 in Australia.
    • ah gotcha ill go remeasure again, thanks for all the tips. when i measured the TPS 5v reference voltage, i put my multimeter leads on 5v power and strut tower bolt, it gave me 5v with boost sensor disconnected and with boost sensor connected it gave me 1.4v. ill try remeasure again this time with volt meter both on the 5v reference and TPS signal ground wire.
×
×
  • Create New...