Jump to content
SAU Community

I drove a Abarth Fiat 124 Spider

PranK

By PranK,
in General Automotive Discussion

 Share

Recommended Posts

PranK Grand Master

PranK

Posted
Posted

I drove a Abarth Fiat 124 Spider

So, my colleague at work this week had a demo Abarth Fiat 124 Spider for the week. Number 1 of 100, I took it for a little spin this morning.

It's hard to get a proper feel for these cars I get to drive as most of the time I am limited to just driving around Pyrmont and can't give them a proper test.

I also wasn't able to get any photos this time. :(

Thanks to NetCarShow.com for the pics.

large.Fiat-124_Spider_Abarth-2017-1280-0

The first thing I can tell you is that it wasn't made for 6'5" 110kg people. I almost had to shoe-horn myself into the driver's seat and then my leg was so significantly wedged in under the dash that I couldn't stop thinking about how much it hurt. It also really hindered my ability to use the clutch. 

So, it was immediately clear to me that even if I wanted to buy one, I simply couldn't. I did put the roof up to see how much of my head would need removing, but alas, this was fine with a good finger's width between my hair and the roof. 

The interior was very nice, but I did feel like I was in a new Mazda3. The dials and buttons and materials were all top notch, but not Italian. The indicator was also on the right, not left like a proper European car. But, that's a bit of a nit-pick from a European car lover.

large.Fiat-124_Spider_Abarth-2017-1280-0

Remembering that this is just an MX5 in a new jacket, I tried hard to see it as an Italian roadster. That was hard as the interior didn't have any Italian feel to it, besides the red stitching on the dash and the red 'ABARTH' branded seats (which would be really nice for anybody who could fit in them.)

I didn't know what engine was in it before I drove it and assumed it was one of Mazda's 1.5 or 2.0 offerings. I was a little underwhelmed with the performance and found very little down low and it was quickly out of puff up top. Meaning, it had a nice mid range and if you can keep it in that range with the 6 speed it would be awesome. It sounded quite tinny though with the odd bauble here and there.

When I gave it back and had a read about it, I found out that it is actually a turbo 1.4. That's very impressive because it definitely behaved like a bigger engine and the lack of torque made more sense to me after that. But, I do not think that the engine fits the car. It needs more, it needs a bigger range, it needs more top end and i also think that 6 cogs for a 1.4 are a little much. 

Note that mine was obviously a right hand drive. :)

large.Fiat-124_Spider_Abarth-2017-1280-1

Handling was great. Turn in felt a little like a Honda Integra Type R like it was a capable front-wheel-drive bordering on understeer. As it is a rear wheel drive, I didn't want to push and see what happened so I kept it sane. I was in Pyrmont, remember. 

I must admit that this little car got as much attention as the Porsche GT4 I drove the other week.

All in all, very fun. I can't see how anybody could survive with this as their daily. The complete lack of interior storage, space and back seats would render this car entirely useless to most full-sized people.

Would you pick this over an MX5?

Some comparison;

Mazda MX5 1.5L: From $42k, 96kw / 150nm
Mazda MX5 2.0L: From $44k, 118 / 200nm
Fiat Spider: From $44k, 125kw / 250nm, 0-100 6.8s.

More pics in the Album.

 

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/467952-i-drove-a-abarth-fiat-124-spider/
Share on other sites
Steve85 Mentor

Steve85

Posted
Posted

I love the little Fiat 500, but this... no. MX5 all the way for me! 

So you said you were quite tall (me too), where were your eyes? I find I tend to be looking at the top of the windscreen...

 

PranK Grand Master

PranK

Posted
  • Author
Posted
1 minute ago, Steve85 said:

I love the little Fiat 500, but this... no. MX5 all the way for me! 

So you said you were quite tall (me too), where were your eyes? I find I tend to be looking at the top of the windscreen...

 

The rearview mirror and top of the windscreen were right in the middle of my gaze. I had to drop my head a little when driving or A LOT when turning left (as the mirror took my entire view).

Steve85 Mentor

Steve85

Posted
Posted
Quote

The rearview mirror and top of the windscreen were right in the middle of my gaze. I had to drop my head a little when driving or A LOT when turning left (as the mirror took my entire view).

Haha! THIS. All the time! 

Sometimes after more than 30 minutes, my neck and back get kinda sore. That said, I bought a Ford Falcon (BA) and it doesn't have much headroom. Thanks a lot sunroof!

Steve85 Mentor

Steve85

Posted
Posted

@admS15, love those little things! Awesome cars. I can't imagine having a bad time in a car like that. It just looks like whenever you jump in it, the car would be happy to see you.

PranK Grand Master

PranK

Posted
  • Author
Posted
55 minutes ago, Steve85 said:

@admS15, love those little things! Awesome cars. I can't imagine having a bad time in a car like that. It just looks like whenever you jump in it, the car would be happy to see you.

If it had a tail, it'd be wagging.

  • Like 1
Kinkstaah Grand Master

Kinkstaah

Posted
Posted

They look way, way, way, way better in person than they do in photos too. And of course sound nuts with a decent exhaust.


Just add a bit of boost and job done. Maybe coils blablabla.

As for ftting, seriously never understood that. I am 187cm, and I fit perfectly fine in a NB which is supposedly the worst to fit in. Can only attribute it to people not knowing how to adjust a seat or I have abnormally long legs. My 198cm friend fits in the same MX5 as well. Just have to lean the sit back a bit and boom, feels more sporty to boot.

Steve85 Mentor

Steve85

Posted
Posted

@Kinkstaah, i can tell you, i'm 2m tall and I like to sit bolt upright in a car. I absolutely cannot stand to be leaning back VL style (or whatever we're calling it now).

In most cars I find the seat goes back far enough, but I run out of head room. So maybe my torso is abnormally long? lol

Kinkstaah Grand Master

Kinkstaah

Posted
Posted

There are obviously some scenarios (like above) where combination of being super tall and super upright will cause an issue. One probably fixed with a custom seat. There's just a LOT of people out there who are... 6ft or thereabouts saying "THERES JUST NO WAY I CAN FIT IN, ITS LITERALLY IMPOSSIBLE TO DO!!!!!" which isn't really true, one should probably try and sit in one of them first.

I don't consider myself tall, but I get a ton of people who are literally amazed I can fit in one, results in me scratching my head a lot!

Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted

would take this over MX5. Japanese build quality but with euro re-sale! how could you say no? 

but serious, im not one that wants a turbo on anything, but i'd want this because MX5 dont got no turbo. theyre both good looking cars (so rare for this era)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...