Jump to content
SAU Community

Recommended Posts

I bought some 2nd hand wheels with RSRRs that were too damn wide for my car - Federals run wide to begin with so 255 was out of the question without cutting arches.

Note -- I'm currently selling the surplus RSRRs if you're after some cheap semis, check classifieds forum

In the end I opted to not cut parts off my chassis and decided to get RS3s as I drive around town on weekends and found a great deal (possibly due to the imminent release of RS4s, expect to see reviews for those from the states soon). Honestly they're not quiet at all and the wet handling isn't on par with the RE003s I had on before. But the RS3s grip so much better once warmed up (less so when cold) and the sidewalls are way stiffer - the front end feels so much more pointy. So just in normal driving the car handles a lot nicer.

If I could be bothered buying separate track wheels and tyres I'd probably have RE003s or similar for street and then dedicated semis such as RSRRs, or perhaps z221s or something, but all in all the RS3s are a great compromise

Edited by Skepticism
25 minutes ago, Hadouken said:

Sorry to say but rsrr are not a dedicated semi.

They are just a very sticky street tyre like the rs3 anf ad08r.

agreed.

I just can't get all the rave reviews on the RS3's; don't get me wrong, i thought they were good dry grip, but sidewalls did feel on the soft side. Didn't NOT rate them but kind of like, i was expecting a tyre that would blow my previous tyres away, and they didn't really. Just IMO.

I feel that Invo's set a pretty high benchmark - in terms of their being a lot cheaper, awesome in the wet, and I found them extremely good in the dry too. That's not saying they're *better* than rs3's or ad08's, but my point is they set the bar high across a few levels and the others haven't then smashed them. Although I will add, not like I test tyres back to back in one day, so, that would be the real test obviously.

1 hour ago, Hadouken said:

Interesting.

I would say the rr and rs3 are miles ahead of the invo.

But like you said. Bang for buck and quiet on the road. Invos emoji106.png

Agreed, INVO is no where near the likes of a RS-3.

The only competition in the Nitto range to the RS-3 are the NT05, however they also need a fair whack of heat before they can perform 

  • Like 2

Fair enough about RSRRs not actually being semis. I thought they'd be equivalent to entry-level semis, but apparently that isn't the case? From all accounts they're not ideal as street performance tyres either, so in the end I wonder what the advantage is over proper R comps, or even over RS3s if they're in the same category?

Edited by Skepticism

bonus of the RSR's is they are CHEAP i get them at $160 a corner for 265/35 18's.... For that price i find it hard to justify a better tyre for what effectively is a street weeekend car that i don't really drive in the wet. Interesting to see what i do when the RSR's i have wear, and i need to find a replacement. A work mate of mine had RSRR's on his WRX are they wore eye wateringly quickly, like within 6 months of street driving. Now granted he has a very heavy right foot but i wasn't overly impressed that after 1 month, they had 20c piece chunks missing.... Realistically though i can't justify going up the price bracket, i don't drive the car often enough, the tyres will go hard before i wear them.  

I'd be going PS4's on a proper street car (daily). I will be putting them on the cube if i can get them in the correct size for the new rims. 

  • Like 1

Keep the cheap Chinese tyres or replace with some $90 rotalla's.

You'll love the road noise, the ability to smoke all 4 (giving you the illusion the car has twice the power)

And they don't break the bank.

[emoji23]

 

Cheap, don't scrub, corner somewhat well lol and somehow at the drags I was getting some pretty good 60fts lol.

I have had them for 6 years ever since I bought the car.

 

I am looking at a rim change, just dont have the $$ at the moment.

Fair enough. personally i can't stand shitty tyres that spin with 25% throttle in wet weather. Id rather just pay the extra for the added performance and peace of mind.
Then again i only have a gtst so much less grip than your gtr. Im also running 235/45/17 tyres which is one of the cheapest tyre sizes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...