Jump to content
SAU Community

Recommended Posts

Racepace R33/R34 GTR Catch Can/Washer Bottle with inbuilt Oil/Air Separator

Hi Guys,

I have a Racepace R33/R34 GTR Catch Can/Washer Bottle with inbuilt Oil/Air Separator for sale. This came out of my R34 GTR and was working perfectly but needs to go now as I have to fabricate a new one to suit the new engine setup.

The great thing about Racepace catch can's over normal ones is they have a built in oil/air separator which means you can have it leading back into your intake without having to worry about sucking oil back through.It also means you end up with one clean looking unit rather than the usual style oil air separator you see on top of the engine covers.

I had this one specially made with -12 AN fittings rather than push on style hoses as it looks a lot nicer. You have 3x -12 fittings for breathing (rockers, sump etc) and a -6 drain.

Overall its in good condition just a little bit dirty. No marks or scratches. Cost me $450 new.

Price is $300 ONO and catch can is located in Rouse Hill, NSW. Pickup is preffered over post but will post at buyers expense. Any questions just message me or sms/call 0403858714.

Thanks,

Brett

17175971_10154110224901895_1752981023_o.jpg

17176293_10154110224916895_791439368_o.jpg

17200447_10154110224996895_823802229_o.jpg

They have channels on the inside of the fittings so the oil can drop down and just suck air out. If the entire thing fills with oil then you have a bigger problem...

  • Like 1
  • 9 months later...

My catch can drain plug is a pain to undo and empty, it just pisses out and hard to stop it.Now there is a servo with E85 it fills up pretty quickly.

I was hoping to pump it out from the top but it looks like there are baffles where the lines come in on top, I do not want to stuff it and I do not know the configuration of the baffles and just do not want to drill through them :/

Any suggestions ?? 

Put a line on the spot where the drain plug is an extend it to under the car, that way you can just open it and dump it into a container which is how mine is setup.

2 hours ago, reaper said:

Put a line on the spot where the drain plug is an extend it to under the car, that way you can just open it and dump it into a container which is how mine is setup.

Do not understand exactly what you mean, got a pic ?

 

I was thinking that I will have to have the catch can taken out to do it properly. Use a butterfly tap , attach a hose to it, with the hose going low enough to miss all the other parts so I can put a container under it.

There is no room to do anything where the drain plug is , I made a funnel with a long hose to drain it , but hard to catch it all when the plug comes out and shit went everywhere , I did catch most of it but, yuk!

I dont have a photo of my current setup but on the old one pictured above the blue cap is where id attach a hose to and do what you described.

image.thumb.png.163a88e7968b947270d8159a94470d99.pngthe drain plug is in a situation were it is hard to undo without it going everywhere as you cannot get anything under it , I will have to have it pulled and and do as you suggest,

Would have been easier if the drain hole was not just about flush :( 

Edited by Nismo 3.2ish
spelling
  • Haha 1

made up a hose and chopped up a milk carton , some thin aluminium and joined them all to make a funnel. The milk carton is pliable and can be sort of molded around the drain hole and it worked pretty good and only a few drips got away, next time I will put a tissue under it and all good  

Funnel.JPG

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha ha ha, that's fair mate! We have the crackhead dogs now. Mainly because the missus wants the crazy dogs while she still has the energy and capacity to be able to keep up with them! Ha ha our current two are both Working GSD, there brothers and sisters (from the same litters) are in Police, Corrective Services, and I believe one did end up in defence force too. They're wild and fun, yet right now, both curled up asleep on the lounge room floor while we watch some TV. Mal is very likely the next dog (unless I get my couch potato guardian dog 😛 )   What are your Kitties names? Are you planning some house work, like those high kitty shelves, built in scratching post, and some cat passages from one room to another room?
    • Maine Coone, did look at but to big and fluffy As for performance dogs, we had Mals at work, performance dogs are fun to watch, but, way to much work for this old rooster
    • Yep, it was only an option on the Q50 Hybrid.  Same in Japan as far as I know. And doesn't use a centre diff like the Suby's do, so not the same as the WRX.  But it also isn't a reactive AWD like other Nissan AWD vehicles are, eg. Murano/Xtrail/etc.
    • You should have got a Maine Coone then. Only thing is they're big. But so cool, and just like a dog. Or, just get yourself a high performance dog. That'll teach you for wanting Parkour indoors 😛
    • Are you thinking of Bens R32? I don't remember if his went through the bonnet itself, but it went through the chassis rail. Brad (RISKIN) bought it, and turned it into a track car. It's funny how anti people are of Jim Berry now. I remember when I pulled mine out (during an engine change) and inspected it and found it cracking badly. At that point in time so many people were even on SAU, were so pro Jim Berry, and that was after Bens GTR exploded his quite publically.
×
×
  • Create New...