Jump to content
SAU Community

Recommended Posts

Hi all can anyone with experience tell me if 18x10 +30 te37sl will fit straight on to 95' series 1 33gtr vspec. I know I will have to roll rear guards as fronts already done factory I assume, but nothing else major needed to just fit and drive away. Brakes are factory brembo still.

 

TIA

Link to comment
https://www.sau.com.au/forums/topic/469773-te37-fitment/
Share on other sites

  • 1 month later...

Thanks for replies! So got the rims, black te37sl 18x9.5 +30 they are....stoked!! Still need a spacer for strut clearance ? And if so looking at the eBay alloy aluminium 10mm universal for all 4 or just for rear? Are they ok quality wise ?

Link to comment
https://www.sau.com.au/forums/topic/469773-te37-fitment/#findComment-7827120
Share on other sites

Can I ask why u bought +30 offsets and then still plan to put spacers on?
If you bought the correct offset then you would have no need for spacers.
With a 10mm spacer you are going to need to get longer bolts

Link to comment
https://www.sau.com.au/forums/topic/469773-te37-fitment/#findComment-7827178
Share on other sites

The rims are second hand and that's the offset they are, didn't think it would be too much of a drama. So buying spacers with the holes to fit over studs then the additional bolts attached to spacer would be the better option?

Link to comment
https://www.sau.com.au/forums/topic/469773-te37-fitment/#findComment-7827183
Share on other sites

So after speaking to a knowledged skyline owner himself he said go 25mm spacer minimum if you want to fill the guards out nicely and should have no troubles with rim or tyre rubbing on strut on inside or tyres rubbing on guard. Sounds like the go, opinions? As I particularly wanted these rims and they came at a very reasonable price I just have to live with the spacer idea.

Link to comment
https://www.sau.com.au/forums/topic/469773-te37-fitment/#findComment-7827204
Share on other sites

Its pretty easy to remove the old studs yourself but the rears are a bit annoying, you have to take apart the handbrake drum assembly to have room to remove the studs.

If your going to run 10mm spacers id say get the GKtech extended studs and 10mm hubcentric slip on spacers.

If your going to run bolt on spacers you wont need extended studs.

If i were you i would sell the wheels and just get proper fitting ones, they will look more aggressive, have better grip and are safer. Bolt on spacers are dodgy as imo, i wouldn't trust them. Hubcentric slip on is better but no spacers are preferable.

Link to comment
https://www.sau.com.au/forums/topic/469773-te37-fitment/#findComment-7827234
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...