Jump to content
SAU Community

Recommended Posts

Learning to drive stick

Might sound like a strange topic to post coming from a guy that just bought a 91 GTR... But... It's the case lol.

I've almost never drove stick before and boy can I say that 1) I'm complete arse at backing up the car and 2) I hate red lights and stop signs. Learning on a stage 2 clutch is pretty rough but so much fun! 

I can't heel n toe, I can't rev match, I have a hard time changing gears in a sharp turn lol, the list goes on. 

So SAU, help a learning bro out, you got any tips for me for learning stick on a skyline? It's nothing like I've drove before. Turbo, rhd, stickshift, it's all so unsettling yet so fun.

 

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/471088-learning-to-drive-stick/
Share on other sites

Don't worry about heeling and toe-ing for now. Practise the basics. Get your take offs smooth. You need to learn how far the clutch pedal comes up before it begins to bite and you need to know the minimum revs it takes to get underway without stalling. From rest let out the clutch pedal quickly to the bite point and then pausing very briefly increase revs and let the clutch right up. Do virtually the same at each upchange until it becomes second nature without over-revving or stalling. To start with do not double declutch for downshifts. If your synchros are still in working order just change down with firm smooth movements. You will soon find the necessary small increase in revs to prevent jerking. For normal driving do not downshift to slow the car - use the brakes (brake pads are cheaper than clutches and gearboxes) and then change down to suit your speed if necessary.

Do this a lot until you are comfortable changing gear while turning and can do a three point turn without drama. Heeling and Toe-ing will be easy if you can do the basics automatically - very hard otherwise.

  • Like 2

Just learn to drive it like your grandma would before you starting trying anything else. Learn the basics first, starting and stopping, shifting smoothly up and down etc. 

you will get there, once it all clicks it's pretty simple.

Edited by dave123456789

What the hell is a stage 2 clutch?

If that bears any reference to a twin plate clutch, please don't learn to drive with one...you will kill it...they aren't meant to be slipped let alone learned on.

Go get a few professional driving lessons so you can trash their car instead; money spent on this will be money saved on you destroying your more expensive components. They have dual control vehicles, so safer environment to learn in and experience teaching teenagers how to drive a manual, so can more than likely teach you too!

As others have said, don't worry about heel and toe etc. That stuff comes in time. When I was 16 all I wanted to do was learn to drive manual and I failed hard on the first drive with parents; couldn't get the hang of it. Embarrassed that I might never learn the "fun" way to drive but my friends could. First lesson with a professional driver and he laughed off the idea of me saying I couldn't drive manual (may he RIP...no, I didn't kill him with my driving). Within 5 minutes he had me taking off smoothly and changing gears no problems. I now consider myself the smoothest operator...a master of launches and wifi changes...and yes I heel and toe when the situation calls for it (note: rarely, and this impresses no one but yourself).

P.S. Smooth is fast!

Thanks all for the replies.

As for the stage 2, it's how we refer to an upgraded clutch where i live. Stage 0 = stock, Stage 2 = getting pretty darn stiff but will handle all the bolt ons and tune. Basically the max for a pure street car that's never going to see any track and It's not a twinplate clutch. It's just real stiff.

 

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...