Jump to content
SAU Community

Recommended Posts

Broken Fuel Rail Bolt - Help Me, I'm F**ked!

Hey SAU.

So as part of my ever running saga of crap I have to deal with on my R33, some of you may know from my build thread that I broke one of the 3 fuel rail bolts. This likely happened from me over-tightening then a few jolts from some spirited tuning runs was enough to vibrate the head off the bolt. Sigh.

Anywho, I set about pulling off the intake manifold today (what a b!tch!) so I could get an "easy out" on the bolt. Well, even as difficult as that was, things are now made even worse by the fact the "easy out" decided to break off in the bolt. FuuuuuuuuuuuuuuUUUUUUuuuuuu... I was even going easy on it.....

So, to the point, I am absolutely struggling to drill through this bolt. I think there's a tiny bit of the "easy out" left in the bolt, but it mustn't be much. I've been drilling it with 2 different drill bits, one a "Heat Treated Tensile Bit" and the other a "Cobalt HSS" bit by Sutton Tools. I've been drilling for over an hour and getting seemingly nowhere :( 

Has anyone experienced this or something like it? Does anyone have advice on what I should do? Is there a mobile specialist that could take care of this f**king bolt for me?

Any help appreciated. Thanks bros.

 

IMG_6128.JPG

IMG_6129.JPG

IMG_6134.JPG

Edited by inmaniac

Grab a small drill bit and drill, then go bigger slowly. Cobalt drill bits are one of the better options for this.

Drill the bolt out as much as you can before trying an easy out. If you manage to get it very central, you can drill it nearly all the way out and run a tap down it.

You will just have to be persistent. Make sure the drill bits stay sharp

1 hour ago, GeeDog said:

In Adelaide we have a guy called Captain Thread. He specialises in this sort of thing, and comes to the car to work his magic. I'd be surprised if there isn't someone similar in Sydney. It would be money well spent.

Like this....get a mobile broken bolt guy out.

He'll tell you that you should have called before breaking the easy out but should still be able to fix it.

Thanks for the responses guys, appreciate it.

Tried 3 different mobile bolt specialists and all 3 went to voicemail (no surprise of course on a Saturday afternoon). Hoping someone will come sort me out tomorrow.

I got a little bit further with the 2 cobalt bits, going to see where I end up tomorrow until one of the specialists get back to me.

I'll update when I get a solution.

Been in this same position, you will need a tungsten drill bit to drill though the easy out. Next time drill a hole close to the same size but smaller to a Allen key you have hammer the Allen key in the hole similar to a easy out but it will twist before it snaps. Hope this helps

  • Like 1

Hey lads.

So we ended up with a solution, albeit one a little left of centre (literally!). I don't advise this as being the best solution but it seemed to work for me given the circumstances.

While trying to drill out the "easy out" as previously mentioned, the drill started to really drill out some meat. I thought I was through the hardened steel of the "easy out" before I realised the bit had actually gone a little to the side and had just started chewing out the side of the aluminium bore. After a few curses, I decided that I'd actually use this to my advantage. So, given I now had a new hole, I decided to tap the bloody thing, and use that as my new bolt hole! In short, I have a tapped hole that is part aluminium on one side, and old bolt on the right haha!

See pictures. It seems to work, the bolt is in there good and proper and it goes in and out very easily! The only other modification was some slight grinding to the fuel rail (ok, a bit more than slight) to match the new offset bolt hole. Still holds good and after a test drive we're all sweet!

Thanks again for the advice fellas.

IMG_6134.JPG

IMG_6139.JPG

IMG_6140.JPG

IMG_6143.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...