Jump to content
SAU Community

CAMS VSSC Round 6 Hosted by SAUVIC Sat Sept 30th

acsplit

By acsplit,
in Archived Events

 Share

Recommended Posts

Dobz Experienced

Dobz

Posted
Posted

Great event guys, had a lot of fun. Driving in the wet was great, the only problem was the session wasn't long enough to get a proper feel for it. Does anyone know where to see the photos that were being taken on the track? I forgot to enquire about them before I left.

acsplit Veteran

acsplit

Posted
  • Author
Posted

Thanks for the feedback, we would have run longer sessions if we got 70 or less entrants so we could run 4 groups.

I have attached times and will post links to galleries from photographers as they come to hand. I know @(OO_SKYLINE_OO) took some snaps!

Times.pdf

admS15 Grand Master

admS15

Posted
Posted
Great event guys, had a lot of fun. Driving in the wet was great, the only problem was the session wasn't long enough to get a proper feel for it. Does anyone know where to see the photos that were being taken on the track? I forgot to enquire about them before I left.

Facebook, trackside action photography. He'll start putting the photos up when he has time to go through them. Most probably during the week.
acsplit Veteran

acsplit

Posted
  • Author
Posted

Thanks to all the SAU members who helped out on the day, things ran smoothly all day and this is not possible without you.

- @Tony Olsson
- @Odium
- Mel
- @Leroy Peterson
- @(OO_SKYLINE_OO)
- @ssxRicho
- Eddie

Thanks to those SAU members who helped out behind the scenes and before the event
- @NUTWGN
- @RobynRyrie

The biggest thanks has to go to @Subarau not only for giving us the opportunity to run the event but also assisting us before and running the day for us.

We also cannot forget all the officials who help us on the day

Thanks to our CAMS Stewards
- Kristy from Timetronics
- All the team from Motorsport Marshalling
- WAP Motorsport as always for providing safety and recovery
- Event Paramedics

 

And anyone else I forgot.

 

  • Like 2
 Share
Go to topic listing


  • Latest Posts

    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Take the fall as a warning sign for future endeavours  Stay safe mate
    • Alex.LA
      R34 GTR Vspec Garage Sale - All must go!

      By Alex.LA · Posted

      hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...