Jump to content
SAU Community

Recommended Posts

400 kw at the track is -5's. Minimum. Can't expect -7's/-9's or whatever to last at high 300's at the track. Shit will be glowing red, melting. Kinda have to "relax" everything considering the punishment. 
"Intune's" R33/RB30/-5's/e85 which was making 424 rwkw lasted 6 laps at Sandown, rear turbo popped. Pulled them off and it's was totally rooted.
My -5 setup lasted 2 trackdays (which they were turned down) and no more than 5000 road kms. Rear turbo was cactus.
A street car making "x" with everything wound up ain't going to last long hauling ass up mountain straight lap after lap.
Forget -9's buttplug's. If you want 400, you NEED -5's at a minimum.

Out of curiosity(and laziness as I dont want to hunt) what "pops" on the dash series?
E.g.,
Ex wheel falls off?
Rear housing cracks?
Bearing assembly?
14 minutes ago, luke gtr said:


Out of curiosity(and laziness as I dont want to hunt) what "pops" on the dash series?
E.g.,
Ex wheel falls off?
Rear housing cracks?
Bearing assembly?

Have seen rear housing cracked.

Both Nick and my -5 had shaft play through the roof. 10,000 km old and 5-7000 km old. Front was pretty good, rear's were rooted. The nug cages of the older - cores can't cop the abuse. (I believe the current ones you buy have the metal cages from the GTX series).

I suppose at the end of the day, especially with E85, guys are pushing harder and harder (I'm guilty of it also with the -5 setup) and it's just burning the candle at both ends. More, more, more!

9.5's/10 the rear will go first, it works harder.

Go back to 2005 and a baller result on -5's was 350. Now it's 450. 

As for rebuilding turbo's. How often do you rebuild them? 618's on a 2.6 would be woeful around something like Wakefield.

If it were my build and I had the parts you do. I'd get it running and doing laps on the 7s then you can dial the suspension tuning in and work down your times. If it's not enough power after the car is solidly sorted and reliably doing sessions, then look at more power.

 

Having a car that you trust to not drop it's guts all over the floor or be a handling nightmare every time you take it to a track day is far more valuable than showing up with 100kw more.

 

To finish first, you must first finish.

 

  • Like 3
1 hour ago, luke gtr said:

Option 3......

I still have my trust 618z's.
Have both the 10 and 8cm rear housings.
Honestly dont mind Bush bearing turbos.
Cheaper to rebuild too.....

I am still amazed at how brutal the power delivery these puppies did. 

It has been 15 months... 

If it were my build and I had the parts you do. I'd get it running and doing laps on the 7s then you can dial the suspension tuning in and work down your times. If it's not enough power after the car is solidly sorted and reliably doing sessions, then look at more power.
 
Having a car that you trust to not drop it's guts all over the floor or be a handling nightmare every time you take it to a track day is far more valuable than showing up with 100kw more.
 
To finish first, you must first finish.
 

Ah!
Very wise sensai.
On 23/09/2017 at 10:27 PM, luke gtr said:


I think more would be unusable on the track(for me at least)

Always need more, to avoid stock motor GTSt boats overtaking you down the main straight at Wakefield haha

Always need more, to avoid stock motor GTSt boats overtaking you down the main straight at Wakefield haha

If eastern creek is anuthing to go by, I'll catch them through the corners anyway.
#racenavara

Dunno if you remember this or not Luke but i spat my rear turbo exhaust wheel, when i was on the run in tune... Running almost no boost... Seriously it was like 4 psi when it went pop. 

Good way to Decat. Except this got stuck between my cat cells and the pipe, i think i had about 1cm of exhaust opening left in my cat. 

IMG_20140315_163019.thumb.jpg.578ede741240442aeeb859ab7f768b0a.jpg

Dunno if you remember this or not Luke but i spat my rear turbo exhaust wheel, when i was on the run in tune... Running almost no boost... Seriously it was like 4 psi when it went pop. 
Good way to Decat. Except this got stuck between my cat cells and the pipe, i think i had about 1cm of exhaust opening left in my cat. 
IMG_20140315_163019.thumb.jpg.578ede741240442aeeb859ab7f768b0a.jpg

Where's the "dislike" button? :(
On 9/26/2017 at 10:22 AM, Piggaz said:

It was a sign!

For a moment you only had one turbo!

Yeah but it wasn't any better than the twins.. In face it was worse. Your argument is invalid. 

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...