Jump to content
SAU Community

Recommended Posts

Hi guys,

I decided to start my build thread here at SAU.com.au as mentioned in my introduction thread a few weeks ago.

The car was imported from Japan in 2014. Completely OEM (RB25DET NEO, AT, Sedan, KR4, built in 1998, 50220km). No modifications were made, which was very important for me. A few scratches and small dents here and there... nothing special.

IMAG1842.thumb.jpg.7917ca288c5a7f050900c55ef1db2f8b.jpg

IMAG1847.thumb.jpg.b0d0c4d3fac062e3d0573af2cbffa9a0.jpg

Due to the standards for registration here in Germany several things had to be done. This includes new lenses with an e-number (certified registration within the EU) for the headlights, a rear fog-lamp and new tires with an e-number, too. After that the car was ready for German streets.

In 2015 I bought a new Blitz Nur Spec RX as a replacement for the factory one and Nismo indicators. 

It was a little strange to me that all the stickers (timing belt change, oil change, ...) were removed. And now comes the very - and with very I really mean fu**ing very very very very - bad thing about the car... The odometer reading was manipulated. During the change of the air purifier I've found a small sticker in the glovebox which says "Filter change at 86.xxx km" and a Japanese date (April/May 2009). Via the page japaneseodometercheck.com I figured out the correct odometer reading, which was around 100.218km at the time I bought the car. After that I decided to check the compression ratio of the engine. Well... guess what? Yes! They were not as good as expected.

In this moment I thought "God damn it! Let's drive the car intil the engine doesn't work anymore. Fu** off!". To my astonishment the engine survived 2015 and 2016. During the off season (October 2015 until April 2016) the transmission was swapped from AT to MT with parts of an wrecked ER34. I've done this by myself because I wanted to widen my skills and knowledge.

IMG_20151230_191237.thumb.jpg.c8c8f7a34cdea729cd3dae1dec6b7c62.jpg

IMG_20160319_174738.thumb.jpg.60b935a0fa0e053ca8ff60f74b9de444.jpg

(That buddy really grew me some grey hair :D)

 

From March 2017 until August 2017 the engine was completely overhauled. Due to that process some aftermarket parts were fitted as well. ;)

The car now looks like this:

21587186_1491875224213038_3463246758906226593_o.thumb.jpg.0bded62023c4a7284f193756fb3692cd.jpg

Let's see what will happen to it in 2018. A few parts are stored in my garage... :)

If you want me to post my spec list just let me know.

 

Regards

Michael

 

Edited by n0va
  • Like 4
Link to comment
https://www.sau.com.au/forums/topic/473032-er34-sedan-by-n0va/
Share on other sites

8 hours ago, Jordy32 said:

Cool car mate, welcome to the forum.

What's on the cards for 2018?

Thanks a lot!

The plans are as follows:

  • Blitz SE intercooler kit
  • Blitz RD oil cooler kit
  • Uras ducktail
  • Link G4+
  • GTX3071R
  • R35 injectors
  • Z32 MAF
  • Remap (ROZ 98)

Let's see what can be done in 2018. Hopefully all of it. :)

8 hours ago, GTSBoy said:

Yup, welcome to Jap import life.  To be clear, you should NEVER trust the indicated kms on the odo on any import.  Everybody here has known about it for 20+ years.  It's a fact of life.

Well... I was young and stupid. :D It should be obviously that not every sold JDM car has done ~100.000km after all those years. I've learned my lesson. Believe me.

  • 7 months later...
  • 2 weeks later...
On 1/4/2018 at 9:27 PM, n0va said:

Thanks a lot!

The plans are as follows:

  • Blitz SE intercooler kit
  • Blitz RD oil cooler kit
  • Uras ducktail
  • Link G4+
  • GTX3071R
  • R35 injectors
  • Z32 MAF
  • Remap (ROZ 98)

Let's see what can be done in 2018. Hopefully all of it. :)

Well... I was young and stupid. :D It should be obviously that not every sold JDM car has done ~100.000km after all those years. I've learned my lesson. Believe me.

Nice looking 4 door! What is remap (ROZ 98)? Ok looked it up you mean tune for 98 fuel. Have you got a good tuner lined up?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
×
×
  • Create New...