Jump to content
SAU Community

Recommended Posts

Helical does not work like an LSD when wheels are off the ground.  So jack it up, put it neutral, turn one rear wheel.  If the opposite wheel goes in the same direction, it's viscous.  If it goes in the opposite direction (like an open diff would) then it's helical.  It almost certainly won't be helical because there's only a small fraction of R34s that have it.

If it's helical, unless you're going to track it, you'd be making a mistake in changing it to a plate type diff.  The helical is the nicest diff for street.  In Supra circles, the helicals for those cars change hands for big $$.

When you buy a diff centre you have to transfer the CW over from your old centre.  What matters after that is whether the new centre is supposed to work with your original stub axles or if it comes with new stubs.  The Nismo diffs come with stubs to suit (when buying for Nissan VLSDs) because the stubs on VLSDs are uneven length and don't suit real diffs.  Other brands of mech diff may or may not be made to work with the uneven length stub axles.  This is a problem when trying to ruin a helical diff, because helicals have even length stubs.  It throws all the variables up in the air and you have to pick through what's going to work and what's not going to work.

Link to comment
https://www.sau.com.au/forums/topic/473415-r34-gtt/#findComment-7868778
Share on other sites

Cool lads. On the wheels turning when in the air, they turn the same way so suggests viscous, which is what I suspected as I had a s15 before with the standard helecoil diff and my car does behave differently I.e one wheel wonder at times

 

so a Nismo is deemed a good purchase ? I struggle to find a Nismo retailer in the uk, could you recommend anywhere and I could get it shipped? 

Link to comment
https://www.sau.com.au/forums/topic/473415-r34-gtt/#findComment-7868821
Share on other sites

^ What Bill said, Jesse supplied a Nismo GT 1.5-way (non Pro) for my 34 sedan.

If yours is mostly a street car, let alone a daily, please please go have a proper drive in a car with a mechanical diff before you get one of these, under different driving conditions.

In my experience a 1.5-way is awesome on the track and in spirited driving, and s__thouse for residential streets, tight T intersections, driveways, supermarket carparks etc. etc. You can live with it #becauseracecar but I wouldn't, not in a daily.

Just my $0.02

Link to comment
https://www.sau.com.au/forums/topic/473415-r34-gtt/#findComment-7868919
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...