Jump to content
SAU Community

Custom tubeframe ghetto beast

360CF

By 360CF,
in Fabrication

 Share

Recommended Posts

360CF Apprentice

360CF

Posted
Posted

Hi guys, just thought I would put up some pics of a fun project I am building. It is a exoskeleton-type chassis that will seat two and is mid-engined. The chassis is not yet complete in the photos, and I am busy adding triangulation and making changes as I go. Won't be using STI wheels, those were just for "full effect" ?

For now this is being built in mild steel as-is a prototype that needs changes made as issues arise during manufacture. Once i am happy with the final specifics and approved for road use, I will build another from much thinner wall 4130 chromoly. I am a Fabricator, so the welding shots were compulsory!

This car is running an Alfa Romeo 2.0 engine, which I have also developed a turbocharger setup for, and will make between 250-350hp boost-dependant. This will weigh about 550-580kg. I also have a 370z engine that I may twin-turbo and throw in the back, which would be quite hilarious.

Depending on my workload, I hope to have this thing running in the next few months, and if there is any interest I will keep it updated as things move along. Hope to do some roll racing and circuit racing in the future at SMSP and Wakefield

 

IMG_3061.JPG

IMG_3070.JPG

IMG_3147.JPG

IMG_3148.JPG

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/474167-custom-tubeframe-ghetto-beast/
Share on other sites
360CF Apprentice

360CF

Posted
  • Author
Posted
1 hour ago, Leroy Peterson said:

Very nice.

What transaxle do you plan to use? Looks pretty tight in the back

There is plenty of room for transversal setups. The current engine as mentioned is Alfa Romeo using a FWD gearbox. When I do the next chassis with the VQ37 I will use a Maxima manual FWD gearbox and shafts, at least that is what I am planning 

GTSBoy Grand Master

GTSBoy

Posted
Posted

Do you know if the RWD VQs will happily bolt to the FWD VQ gearboxen?

I was going to ask "since when has there ever been a VQ powered manual Maxima?" and then I looked on Wiki and was surprised to see that Nissan actually made some.  Seems totally out of character/market segment for a Maxima though.  I wonder how many are actually out there in the wild?

360CF Apprentice

360CF

Posted
  • Author
Posted
15 minutes ago, GTSBoy said:

Do you know if the RWD VQs will happily bolt to the FWD VQ gearboxen?

I was going to ask "since when has there ever been a VQ powered manual Maxima?" and then I looked on Wiki and was surprised to see that Nissan actually made some.  Seems totally out of character/market segment for a Maxima though.  I wonder how many are actually out there in the wild?

To be honest I would assume there would be some adaptation necessary, however the standard VQ bolt pattern should carry over without issues, then the "fun" would begin to make it all work. I feel the gearbox itself would be quite robust, as it is designed for the VQ engine and to carry a big car that would potentially be full of passengers and a big trailer hanging off the back. No idea how many were produced, but I will be beginning a search in the near future

  • 2 weeks later...
360CF Apprentice

360CF

Posted
  • Author
Posted

So I decided that the Alfa Romeo engine would be better served in my Formula 3 (as it was an engine originally used in the series) and have decided to install a Lexus 4GR-FSE engine, stroked to 3.5L and using a single turbo setup. The second chassis I make will probably be intended to look a lot more like the Ariel Atom and that will use the VQ37 engine that I have stored away.

I advanced with one of the manifolds today, using a narrow angle configuration for the runners, which will promote scavenging. The two banks of manifolds will merge together and the turbo will sit above the transmission. 

 

IMG_3268.JPG

IMG_3258.JPG

IMG_3264.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...