Jump to content
SAU Community

Recommended Posts

Hey all,

Thought i had a build thread for my 32 but cant see it so maybe not, anyway.

Bought (becuase it was cheapppp) what can only be described as the worst looking r32 around. Ugly kit, check. Ugly white painted interior, check. $2 bucket seat, check. on LPG, yes LPG! check.

i wanted a project, so i bought it for cheap and brought it home

tapatalk_1493631220925.jpeg

tapatalk_1493631227667.jpeg

tapatalk_1493631237528.jpeg

tapatalk_1493631240309.jpeg

tapatalk_1493631243009.jpeg

tapatalk_1493631245378.jpeg

tapatalk_1493631248030.jpeg

tapatalk_1493631250584.jpeg

tapatalk_1493631253491.jpeg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/474206-r32-gtst-build/
Share on other sites

Since i killed the front bar, i found a GTR front bar and lip

Plus for now also got a standard r32 bonnet

Also removed everything to do with the LPG, thankfully it wasnt dedicated LPG. Just had to remove, fill a few holes here and there and bingo

11208664_10155856613975215_3195446715848538132_n.jpg

20216_10155856614180215_54758112596699073_n.jpg

11215723_10155856614275215_4151277548917985700_n.jpg

Edited by Adz2332
Link to comment
https://www.sau.com.au/forums/topic/474206-r32-gtst-build/#findComment-7877417
Share on other sites

a pair of excellent nic 32 gtr seats came up for cheap so replaced the crappy $2 recliners in it.

Plus started to remove anything painted white inside the car! and also changed the steering wheel to one i had lying around

11902445_10155978663400215_5629517546230919331_n.jpg

11846682_10155987522430215_7147752335036462999_n.jpg

11880564_10155987522380215_6521737621064915301_n.jpg

11902455_10155987522300215_5648516395598814777_n.jpg

Edited by Adz2332
Link to comment
https://www.sau.com.au/forums/topic/474206-r32-gtst-build/#findComment-7877419
Share on other sites

The rb20 still runs fine, so removed to give it a bit of a tidy up and new gaskets etc etc. not looking for this car to be a power house, always wanted something that looks nice when you pop the hood. plus i already have my track car for speed.

So while the engine is out im tiding up the engine bay. removing all the HICAS, Putting the Battery in the boot, and hiding the fuse box. Will also change a couple things like the washer bottle, over flow etc. Will then fill holes, smooth and paint

19959402_10159081128740215_7936684998751503758_n.jpg

20031587_10159081128870215_5738857724779214946_n.jpg

34287160_10160518840560215_5416139959973183488_n.jpg

34447272_10160518841490215_2851185735615119360_n.jpg

Edited by Adz2332
Link to comment
https://www.sau.com.au/forums/topic/474206-r32-gtst-build/#findComment-7877423
Share on other sites

I had a look at the Pandom kit for the 32 and didnt like it... so instead i did a thing.

I bought genuine rocket bunny flares front and back, same as the car below, from streeter.

Now not 100% sure ill go this way but they are sitting there

12524159_10208156045850421_3859121542653672336_n (2).jpg

13221065_10208156046810445_840144768141765519_n.jpg

13254512_10208156045810420_5183295254576066262_n (2).jpg

FB_IMG_1468839933923.jpg

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/474206-r32-gtst-build/#findComment-7877426
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...