Jump to content
SAU Community

Recommended Posts

5 minutes ago, whatsisname said:

Yokohama A050, I think they're M compound.

there's your problem lol... put some normal street tyres on the back and strap the car down a bit tighter using the traction bar on the dyno, might see an instant 10~15kW or more!

As it squats and moves forward into the front roller the rear will squat down.

  • Like 1
there's your problem lol... put some normal street tyres on the back and strap the car down a bit tighter using the traction bar on the dyno, might see an instant 10~15kW or more!
As it squats and moves forward into the front roller the rear will squat down.
Cheers. Sounds like a good plan.
Might even give a hub dyno a go at some stage.
4 minutes ago, whatsisname said:

600rwkw! rhkw? emoji1787.png

I think easy, Oli's car put down 615kW on a Mainline hub dyno at Mick's Motorsports.

Also runs a GTX3584RS

  • Like 1
7 minutes ago, Dose Pipe Sutututu said:

I think easy, Oli's car put down 615kW on a Mainline hub dyno at Mick's Motorsports.

Also runs a GTX3584RS

Nice! Which turbine housing, 1.01 or 1.21?     

Time to locate a local Mainline hub dyno :8_laughing:

 

4 hours ago, Dose Pipe Sutututu said:

I think just the 1.01 rear, is that right @WantGTR?

I just realised, I've discussed that car and turbo combo' with the owner. R32 GT-R + GTX3584RS 1.01 with 784hp (585kW) at the hubs and a maiden pass of 10.8 @ 140mph at 1600+kg. It is a very impressive set of numbers.    

11 minutes ago, whatsisname said:

I just realised, I've discussed that car and turbo combo' with the owner. R32 GT-R + GTX3584RS 1.01 with 784hp (585kW) at the hubs and a maiden pass of 10.8 @ 140mph at 1600+kg. It is a very impressive set of numbers.    

It has changed again

What da f**k is going on here?
The rs is a good turbo. 
[mention=11136]Lithium[/mention] scrap your findings. Get a gtx42. Dont be a poof. Relax about dyno sheets. Lol
I concur. The RS is not RS (rat shit).

GTX4202R for the win... power and response [emoji1787]

Dyno sheets are where it's at! Lol
  • 4 months later...

I keep getting asked to update this list with old and new turbos, so I've added some ones "based off request" and also added some current or future units I have some data on.

The G30-770 I have not seen a compressor map for so just made an educated guess as to where it will sit:

image.thumb.png.76310d12850192bd8f06415334db7dce.png

  • Like 2
1 minute ago, Dose Pipe Sutututu said:

If you're really bored, compressor inducer/exducer size would be porno

flamin mongrel.

 

But you're right, I probably should have thought of that at the start

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...