Jump to content
SAU Community

Recommended Posts

Does the oil filter relocator kit make the oil changes easier/cleaner?

shit yeh - photo below, not the best shot of the engine bay but will for viewing purposes. Weather its cleaner im not sure, i havnt done a change yet. but its upside down so i assume a rag or 2 wouldnt hurt.

enginebay-1.jpg

Hi All,

I have a 1996 R33 GTS-T series 2 - It is my baby, love it!!

It is pink with a purple pearl, i had 20" Chromies on it but they were stolen and my car was vandalised so now i have stockies - I will have it here in Canberra in 2 weeks from Griffith in NSW where i used to live :yes:

So yeah, i attached some pics - hope they work!

I have an aftermarket front mount intercooler and a pod filter - not much atm...

post-57984-1227437902_thumb.jpg

post-57984-1227437995_thumb.jpg

Hi All,

I have a 1996 R33 GTS-T series 2 - It is my baby, love it!!

It is pink with a purple pearl, i had 20" Chromies on it but they were stolen and my car was vandalised so now i have stockies - I will have it here in Canberra in 2 weeks from Griffith in NSW where i used to live :yes:

So yeah, i attached some pics - hope they work!

I have an aftermarket front mount intercooler and a pod filter - not much atm...

post-57984-1227437902_thumb.jpg

post-57984-1227437995_thumb.jpg

Yeh welcome Melly, nice 33 you have there.. :P

hi all,

Just bought a 93 R32 GTS-T with a RB25 conversion. Apart from gauges, pod and stereo its stock but i have plans for it i.e. intercooler, ECU, 18" wheels, lowered and du luck bodykit....and in time more engine stuff...

havnt posted here in a long while but im bored so here i am.

hi to everyone that does not know me which, i think, is everyone.

1993 r32 gtst

lowered

Veilside front and skirts

3" turbo back exhaust

alpine sound system with tv that doesn't display much

turbo timer

aftermarket steering wheel

and the best thing of all... the word skyline lights up an aqua colour at the back (hope that makes sense)

the rest is stock due to lack of funds

oh and the car is white

question champ how did you get the back bit to light up.??

I just noticed this post lol, isnt it meant to be the RYCO Z145A?

std OK, but if you run an oil cooler or a relocator kit it can be something else. Livo's looks like it's actually a Z55? [3 maybe] when you zoom in, mine is a Z418.

Actually when you look at the Ryco catalogue, the footprint and threads are basically the same [within 0.5mm] for the Z553 range and the 418, only the height is different. The Z145A is different. I don't know if the intended use for each is different.

  • 1 month later...

My new ride, pick her up at the weekend.

R31 GTS series 2 Skyline

1989 R31 GTS Series 2 Skyline: Build No: 055 of 200.

Manual 5 speed RB25 turbo box- h/duty clutch

new bilstein shocks all round-lowered king springs,

Has all the standard Nissan SVD inclusions-

extractors, stage 3 cam, piggy back ecu, adjustable camber re- strut tops, chip, LSD, Scheele bucket seats

sandblasted rocker cover and repainted ( black with red writing/stripe )

BTW: My HR 31 GTS-X is for sale $ 4000.00 and she's yours...

This is a picture of one I owned previously, but you get the idea...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...