Jump to content
SAU Community

Recommended Posts

57 minutes ago, Joshnew6 said:

I was told that I should gap them down from 0.8 to 1.1m 

Other way around.  Stock is 1.1mm, gapped down means smaller, ie 0.8mm.

Gapping them down can (and will) help if the coils just aren't good enough to run against the boost....but these days any misfire should be taken as a reason to upgrade the coils.  Yaris, Audi, R35 GTR, etc are all options these days.

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7900921
Share on other sites

This topic will probably help you Josh,

As stated above if smaller gapped plugs don't work you'll need to upgrade your coilpacks, the three options what come to mind are Splitfires (around $500), yellow jackets ($300), or yaris coil pack mod ($150ish)

 

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7900955
Share on other sites

  • 1 year later...

just for closure, I was a newbie to everything to do with Rb's, I was running 25 Psi on E85 with spitfire coils, and the problem ended up being that I was running cheap copper plugs, changed to iridiums and problem solved!!

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7943185
Share on other sites

  • 4 weeks later...
  • 3 weeks later...
On 3/18/2019 at 7:14 PM, GTSBoy said:

Other way around.  Stock is 1.1mm, gapped down means smaller, ie 0.8mm.

Gapping them down can (and will) help if the coils just aren't good enough to run against the boost....but these days any misfire should be taken as a reason to upgrade the coils.  Yaris, Audi, R35 GTR, etc are all options these days.

gapping down to .06mm is suggested when running high boost with e85 does that sound right?

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7945212
Share on other sites

48 minutes ago, SKY5HW said:

gapping down to .06mm is suggested when running high boost with e85 does that sound right?

0.6mm bro, 0.06mm is not cool!

 

Yes gapping plugs down is reccomemend if coils aren't powerful enough

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7945216
Share on other sites

1 hour ago, SKY5HW said:

gapping down to .06mm is suggested when running high boost with e85 does that sound right?

 

32 minutes ago, Ben C34 said:

0.6mm bro, 0.06mm is not cool!

 

Yes gapping plugs down is reccomemend if coils aren't powerful enough

Note word with emphasis. It's a really weak if. The real recommendation is to improve the coils. Gapping down plugs is a bandaid. Bandaids should not be used where proper fixes exist.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7945218
Share on other sites

On 16/11/2020 at 6:36 PM, Joshnew6 said:

just for closure, I was a newbie to everything to do with Rb's, I was running 25 Psi on E85 with spitfire coils, and the problem ended up being that I was running cheap copper plugs, changed to iridiums and problem solved!!

 

This really doesn't make much sense, unless your copper plugs were old and fouled and the problem was fixed with new plugs. Iridiums dont give you a better spark than coppers, they are just supposed to last longer. But on a modified high performance engine you dont tend to get that longevity out of them and need to replace them more often anyway. The price difference between coppers and iridiums is why most people on here will be running coppers. 

 

But yeh, I agree with GTSBoy here, gapping plugs is SO 2010. Nowadays R35 and Audi R8 conversion kits are a dime a dozen, I'm amazed 'Splitfire' and 'feeler gauges' are still words that people know.

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7945220
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...