Jump to content
SAU Community

R34 Adjustable Camber Arm Reviews.

Hanzie
 Share

Recommended Posts

Hanzie Enthusiast

Hanzie

Posted
Posted

Hey guys, Ive read a tonne of posts about this, but most seem to either be about race car camber or lean into a different direction.

So quick info about my situation, driving to work in an r34 25gt, and my front tyre busted, massive wear on the inside, got new tyres and an alignment, the mech said he could only get the camber to -2°, but as mine is a daily and a 25gt, I'm not looking for much camber, would like to get back to even wear on tyres maybe -.75°/-1°.  

Been looking at adjustable upper camber arms, (just incase I ever get rims or decide to lower it) but wanted reviews before I buy, just incase some are notorious for easy breaks, squeaking/clunking after a short time etc

The ones I've looked at are:

SRI - $220

Gktech - $349 (so far thinking these ones) 

Zss - $459

Cusco - $479(heard they are really good for price) 

Driftwork - $216

Hard race - $499

I looked at ikeya formula, but too expensive for a 25gt. Has anyone had good/bad cases with any of the above arms?

Sorry if I've forgotten any details to include for further help. 

Link to comment
https://www.sau.com.au/forums/topic/476716-r34-adjustable-camber-arm-reviews/
Share on other sites
Hanzie Enthusiast

Hanzie

Posted
  • Author
Posted

Completely stock height and wheels, I asked the mech what was causing the negative camber and he couldn't tell me, just said I need aftermarket adjustment parts, I asked if anything was bent or seemed damaged and he said no. So how would I go about finding what's caused it? I've never really worked on suspension so I'm outta my element. 

Kinkstaah Grand Master

Kinkstaah

Posted
Posted

The car has *some* adjustability and there's bushes you can get from Whiteline or Superpro that will adjust camber that is more than enough for a stock height car. They are cheaper, legal, more compliant and overall a better solution that what you listed..

That said, there IS a problem if you can't get less than 2deg neg camber on a stock car. Fixing this is definitely what you would/should/must do first before buying aftermarket arms to sort it out.

This is definitely a "Find someone who knows what the underside of these cars should look like" situation

Hanzie Enthusiast

Hanzie

Posted
  • Author
Posted

Ok ill call the smash repairs and see where they get chassis straightening done, but cars never had a crash or anything so not sure if chassis is damaged but worth a look, I might even get a 2nd place to try and align it, as I read a post on SAU where someone had the same deal, 1 place couldn't align it, but another could, the mech could be trying to stitch me up for extra work. 

JGTC Proficient

JGTC

Posted
Posted

We have have a 25GT with standard suspension, the front and rear camber is pretty close to neutral with little to no wear on the inside.  Common for cars that are lowered on springs or coliovers to exert excessive rear camber, is your issue on the front or rear?

Hanzie Enthusiast

Hanzie

Posted
  • Author
Posted

JGTC it's front suspension that's my issue, but I may see if I can get the stuff gtsboy stated above checked out, cause I've never had a problem with wheel alignments till now, recently replaced the right control arm as the ball joint was buggered, and the radius arm bushes. So ill get the other bushes and arms checked, but thought they would notice something wrong when doing the alignment, i also jacked the car up and had a look and couldn't see any other damage, besides what I've gotten fixed. 

Hanzie Enthusiast

Hanzie

Posted
  • Author
Posted

That's what I'm thinking, had a look myself (I'm a fkn noob) noticed the radius arm bushes and ball joint, but didn't notice anything else, really hoping I fall in the category of having a shite mechanic, will book in with another place, ask for stats of camber, toe etc, and post for you pros to help me, appreciate the help from all, glad I didn't buy the arms. This is why I love SAU. 

hardsteppa Grand Master

hardsteppa

Posted
Posted

I run around 2.75 deg neg front camber on a daily driven street car, and i have very little issue with inside tyre wear. Toe, worn components or bent arms/chassis are likely to be the real issue.

  • Like 1
  • 2 weeks later...
Hanzie Enthusiast

Hanzie

Posted
  • Author
Posted

So I was a victim of a shoddy mechanic, went to a new place today for an alignment, and afterwards they said they got it down to -1°. Which I'm happy with. Turns out the toe was the culprit. Glad I asked SAU before buying camber arms. Cheers fellas. 

  • Like 1
  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...