Jump to content
SAU Community

Recommended Posts

Hi all, 

I have a 97 BCNR33. 

I recently bought a second hand set of the Nismo Weldina NE-1 Exhaust system. From the front to the back. 

s-l640.jpg

I took it to my mechanic that usually does all my mods and maintenance, but he has had trouble installing it.

He said that the Catalyst Sensor Assembly had rusted and needed replacing. 
We went ahead and bought a new one.

IMG-20190702-WA0004.jpg
s-l300.jpg

But now he has an issue attaching it to the nismo exhuast pipe as there is no pre drilled hole or fixing to hold or house the sensor.

I’ve googled Nismo R33 Weldina NE-1 Exhaust system installation problems or guides but nothing comes up apart from sales links and no one seems to have had this issue on the forum either. 

Is my mechanic barking up the wrong tree or is there a way round this please? 

Thank you

That temperature sensor is designed to tell you if the cat has failed and is blocked, it simply turns on a warning light on the dash if the exhaust is too hot. Everyone just disconnects it which is probably why there is nowhere to attach it to the new exhaust.

The r34 GTR does have a separate exhaust sensor in the dump pipes for dash display

Thank you for your reply. 

What is surprising to me is that nismo hadn't designed the exhaust system with this OEM sensor part in mind. Normally these top class Japanese products are meticulous. 

Moreover, this unit is second hand...so how did the previous owner get around this issue. 

My mechanic has suggested fabricating a boss but I am hesitant on drilling in to such a nice product.

Either just tape the sensor up out of the way or weld a bung in for it. Neither are difficult nor destructive.

As to why Nismo didn't make a spot for it......the original system has one cat, hence one good spot to fit a single sensor. The Nismo system has 2 cats, so it doesn't have a good spot to fit a single sensor. Seeing as fitting such a system implies no longer giving a f**k about trivial things like cat over temp sensors, they took the sensible approach and omitted it. Besides, if you had it, and you had a fault on the other pipe....you wouldn't know. Better to have your ignorance spread evenly over both pipes.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...