Jump to content
SAU Community

Recommended Posts

Hey boys and girls, so stupid thing to be saying but I only just noticed I’m missing a belt, which is it, why does my car still run without it, it’s in the pic.

is there a pulley kit to replace the things the belts run on?

my headlights have what bulbs to use, I’m assuming I can just buy the ones at super cheap nothing has to be special about them, they will fit?

when I go from park to reverse or into auto there is a shift in my car and sometimes a cluck, i saw on chrisfix that it might be the uni joints, can I replace those without replacing the whole ?tail shaft?

and lastly someone before me has use like a liquid glue to stick the side skirt on, looks like polyurethane maybe, any ideas to get this off?

7FC4DBEB-E07F-41B6-B404-EA6D19E88A07.jpeg

49094D6E-D911-4876-BA77-4B03E10DEB12.jpeg

4D437542-AAC9-4762-BEFD-87785D771F15.jpeg

48 minutes ago, GTSBoy said:

Ever wondered why your air-con doesn't work?

And no, you cannot service your tailshaft yourself. Take it to a mechanic, or a drive specialist like Hardie-Spicer.

Ahah yes I have, as I thought it might of been that.

alright thanks I’ll do that then

1 hour ago, niZmO_Man said:

if you see the markings above the yellow sticker, it says D2R 35W

I don't think Supercheap stock them, but you can check.

Or get two of these

https://www.powerbulbs.com/au/product/osram-xenarc-d2r-single

Yea I saw those, just wasn’t sure if there was a difference to those then the modern ones

6 hours ago, GTSBoy said:

Ever wondered why your air-con doesn't work?

And no, you cannot service your tailshaft yourself. Take it to a mechanic, or a drive specialist like Hardie-Spicer.

 

5 hours ago, Crepsley said:

Ahah yes I have, as I thought it might of been that.

alright thanks I’ll do that then

lol

the funny thing is, someone went to the trouble of putting it on and tensioning it.  Perhaps it did actually work (a little, at first)

You just need the right belt and that will be sorted, the globes, yes just buy some D2Rs (more recent ones are compatible so no issue there)

Re the clunk....best to get a mechanic to look at it. There are about a million (OK, 10) places between the transmission and the tyre that could clunk, no point just guess it is a tailshaft.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...