Jump to content
SAU Community

Recommended Posts

G'day All

Well it's been a while since I've owned a skyline and I'm looking into a R34 GT-T, I sold my last one over 5 years ago at 120xxxkm & the one I have my eye on currently has just under 190ks. My hesitation lies in the possibility of re-selling down the track when it's more likely going to have done 220ks...do you think the R34 will retain value past 200,000km and a market for buyers at that km? I'm not massive into modding etc, would just be something to enjoy owning once again. Cheers, Neo34

3 hours ago, Ben C34 said:

As time ticks by the ks matter much less of they aren't verified.

Does the car you are looking at have full history to verify the ks? Did your previous car?

 

It has some import papers but nothing else, I'm strongly considering spending the $ and getting a check from Japan if it's going to assist in verifying ks 

13 hours ago, neopowered34 said:

It has some import papers but nothing else, I'm strongly considering spending the $ and getting a check from Japan if it's going to assist in verifying ks 

For me, it would depend on condition at these kms. 100+ kms on the clock and you know you aren't buying a low km car. 
At that point you should be looking at condition more than anything else. 

You could get a check, but i'm not sure if it would be worth it. If it were me, i'd rather spend the money on a decent mechanical inspection by a Skyline expert (or at least someone familiar with them). 

Regarding your concern around re-sale value, at these price points, I would expect these to hold their value over the next 10 years. However, I would not expect this to appreciate. If you were super keen on buying something that will appreciate, I would suggest looking at a stock, low kms GTT or equivalent.

Condition is the only thing that matters. My car is at 230k km and has had 2 engines, 4 different transmissions, 2 rear subframes, 3 different sized front brake setups, every suspension bush changed at least twice, some as many as 10 times. 3 different radiators, 3 ECUs, etc etc etc.

Some parts of the car are still original.

52 minutes ago, Steve85 said:

 

Regarding your concern around re-sale value, at these price points, I would expect these to hold their value over the next 10 years. However, I would not expect this to appreciate. If you were super keen on buying something that will appreciate, I would suggest looking at a stock, low kms GTT or equivalent.

Thanks for the reply and I agree with your projection; I’m specifically wanting something that will at a minimum hold value i.e a bayside blue GT-T or a Stock low km GT-T with factory options. PMd you something for further discussion 

  • Like 1
1 hour ago, niZmO_Man said:

Definitely do a history check. Could have been smashed and fixed, could also be a good condition import, who knows.

Will do, it’s $95 USD...but a small investment for a 20k + car

22 hours ago, GTSBoy said:

Condition is the only thing that matters. My car is at 230k km and has had 2 engines, 4 different transmissions, 2 rear subframes, 3 different sized front brake setups, every suspension bush changed at least twice, some as many as 10 times. 3 different radiators, 3 ECUs, etc etc etc.

Some parts of the car are still original.

This is true. 99.9% of Skylines now are some variant of Grandfather's Axe/Ship of Thesus. Condition and kms are nearly completely disconnected nowadays.

Nearly ?

6 hours ago, Dose Pipe Sutututu said:

Remove dash, replace with MoTec C1212. tell next buyer no idea of KM.

I'm after one that's as close to stock as possible, this would probably hurt the value but yes would stop Km going up ?

On 15/01/2020 at 9:02 AM, KiwiRS4T said:

Checkout the steering wheel, has paddle shift, may have been a conversion or replacement....

2 hours ago, neopowered34 said:

Checkout the steering wheel, has paddle shift, may have been a conversion or replacement....

VIN is JN1GCER34A0202109 which shows as factory auto, good spotting.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...