Jump to content
SAU Community

Recommended Posts

Hey all have a few bits and pieces I don’t need and taking up space:

 

Factory turbos  with dumps(no shaft play)$250

Factory blow off valves $150

Factory manifolds $50

Factory crossover/intake piping $100

Blow off valve piping $50

RB26 cam backing plate $40

3 sets of intakes 1 k&n 1 hks 1 unknown $150

Factory afm x2 $100

All oil, water and wastegate lines including banjos $100

Factory fuel pump good nick $50

Mines ecu $50

RB26 alternator $50

Fuel sender/ top hat unit $20

Charcoal canister $50

R32gtr washer bottle with motors $50n

Nismo fuel reg with standard rail and 11mm raceworks adaptors $150

Factory RB26 camshafts $100

Factory radiator with cut up shroud $70

RB26 sump with cracked diff housing $100

Complete RB26 sump suit rebuild with center and 4.11 gears $250

2 front diff centres $50 each

Front 4.08 ring and pinion $50

Late model r32 gtr 4.11 rear diff $1100

Borg Warner s360 .91 t4 spilt entry made 330awkw on 17psi $500

R32 3inch exhaust with xforce muffler $100
 

rb26 flywheel with exedy heavy duty clutch $150

 

Pick up only! Located south east Melbourne
Happy to do bulk deals 

Message me on zero447086966 for pictures 

Cheers

Edited by Pierreb
Link to comment
https://www.sau.com.au/forums/topic/479964-various-rb26-r32-gtr-parts/
Share on other sites

hi mate I would like all the factory water lines, I would forsure add for shipping and your time. im in Canada..pm me if your interested I see some other stuff I would like but may be sold already. one of my stock pieces for the water lines I had to retap cause it was stripped so this would be a god saver!

sorry for the double post by water lines I meant everything you had together there for 100 including oil lines, banjo etc. not just the water lines. cheers m8

  • 3 weeks later...

price updates on what’s left 


RB26 factory breathers with -12an fittings $20

RB26 cam backing plate $40

Hks intake with k&n filtres $120

All oil, water and wastegate lines including banjos $100

RB26 alternator $30

Nismo fuel reg with standard rail and 11mm raceworks adaptors $120

Factory RB26 camshafts $100

Factory radiator with cut up shroud $50

Complete RB26 sump suit rebuild with center and 4.11 gears $180

2 front diff centres $50 each

Front 4.08 ring and pinion $20

RB26 flywheel and heavy duty pull type clutch exedy fair bit of life left $120

Factory cold side cooler intercooler piping $50

R32 gtr washer bottle with pumps $50

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...