Jump to content
SAU Community

Recommended Posts

If it’s been wired to 12v will that have f**ked the sensor?

as I’ve tried changing the wiring to suit as per above, so wired black to yellow and white to green. 
or have I messed that up (I’m terrible with wiring it’s my number one hate 🤣)

2 minutes ago, DaymoR32 said:

If it’s been wired to 12v will that have f**ked the sensor?

Hmmmm not sure, but an assumption is maybe.

A reluctor creates its own voltage so you don't feed it one.

1 minute ago, Dose Pipe Sutututu said:

Hmmmm not sure, but an assumption is maybe.

A reluctor creates its own voltage so you don't feed it one.

Aye probably dead then 🤣 will probably just pop the stock CAS back on.

i do have the paper wiring diagram with notes on it somewhere so I’ll cross reference that first

26 minutes ago, DaymoR32 said:

Aye probably dead then 🤣 will probably just pop the stock CAS back on.

i do have the paper wiring diagram with notes on it somewhere so I’ll cross reference that first

Maybe find the spec sheet and see what the resistance of the coil is, possibly it's not fried? Especially if you didn't short it 

15 hours ago, Dose Pipe Sutututu said:

Maybe find the spec sheet and see what the resistance of the coil is, possibly it's not fried? Especially if you didn't short it 

maybe another thing for me to try? timestamped (i know its the nz wiring kit, but this is on the haltech software side)

 

12 minutes ago, DaymoR32 said:

maybe another thing for me to try? timestamped (i know its the nz wiring kit, but this is on the haltech software side)

 

You can just swap the pins at the CAS connector side.

You could go old school and use a test light to see which pin is going back to B1 on your ECU

On 4/19/2024 at 10:45 AM, Dose Pipe Sutututu said:

You can just swap the pins at the CAS connector side.

You could go old school and use a test light to see which pin is going back to B1 on your ECU

I ended up trying every pin combination. got the car to start once, then rev'd it and it died. then couldnt get it started again.

Threw my toys out the pram and put the stock CAS on and it fired first turn of the key (with backup map reapplied)

I'll re-visit it another day when i get the motivation again.

40 minutes ago, DaymoR32 said:

I ended up trying every pin combination. got the car to start once, then rev'd it and it died. then couldnt get it started again.

sounds like you are super close, either the air gap is out OR the trigger arming voltage is too high.

In NSP, just plot the trigger voltage vs. RPM vs. time and when you crank it you'll see what it reaching, adjust the trigger arming to suit

27 minutes ago, Dose Pipe Sutututu said:

sounds like you are super close, either the air gap is out OR the trigger arming voltage is too high.

In NSP, just plot the trigger voltage vs. RPM vs. time and when you crank it you'll see what it reaching, adjust the trigger arming to suit

next time i have a full weekend i'll have another play, currently one month away from wedding so have no free time...

Thanks for the pointers though,

1 minute ago, Dose Pipe Sutututu said:

Don't buy a Tiguan :D 

I'm from the UK, everyone knows you buy a Seat or a Skoda as they generally run better than their VW / Audi Brothers 😆

  • Haha 1
4 minutes ago, DaymoR32 said:

I'm from the UK, everyone knows you buy a Seat or a Skoda as they generally run better than their VW / Audi Brothers 😆

Lololol... Funny between brands reliability changes, yet it's technically the same parts.

  • 10 months later...
55 minutes ago, shortyboy said:

any update on the yelsha-d trigger setup? Looking to get one for my neo on link g4x

No sorry mate, I gave up on it, also sold the car mid December and recently replaced it with a BYD Shark / Temu Raptor

IMG_1092.thumb.jpeg.559cf3aa3da79d60352975f114eb3f07.jpeg

IMG_1093.thumb.jpeg.ef526009f8953da4949c1f8418afaea0.jpeg

  • Like 1
22 minutes ago, DaymoR32 said:

No sorry mate, I gave up on it, also sold the car mid December and recently replaced it with a BYD Shark / Temu Raptor

IMG_1092.thumb.jpeg.559cf3aa3da79d60352975f114eb3f07.jpeg

IMG_1093.thumb.jpeg.ef526009f8953da4949c1f8418afaea0.jpeg

Aye I know, moving interstate, have to give up the work vehicle so replaced it with something “sensible”. Fastest Ute you can buy for under 250k 🤣

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
    • Yeah I also looked at Plazmaman, but, it ended up alot  cheaper getting black ones through EFI when you also added in the delivery cost
    • Nice shot! They look super clean. The roof rack delete on the black one is interesting. Would like to see more pictures from different angles. It's subtle but could make quite a difference to how the car looks in profile.
×
×
  • Create New...