Jump to content
SAU Community

Recommended Posts

1 hour ago, trel said:

Absolutely would working with a friend on his car previous owner has really butchered this thing...

ok, I'll shoot grab some pics of it tomorrow morning! 

I have those, it's the lines from the bottom of the canister I'm trying to find in FAST as well. Thanks dudes. ? Sorry for hijacking your thread mate! The lines are re-routed they've put a canister under the driver side guard. Has anyone ever seen this? I don't understand the purpose of doing this.

20200813_135239.jpg

Edited by trel
On 8/14/2020 at 11:47 PM, trel said:

I have those, it's the lines from the bottom of the canister I'm trying to find in FAST as well. Thanks dudes. ? Sorry for hijacking your thread mate! The lines are re-routed they've put a canister under the driver side guard. Has anyone ever seen this? I don't understand the purpose of doing this.

 

Probably just because it's ugly. 

  • 2 weeks later...
On 7/27/2020 at 4:40 PM, PLYNX said:

That's an exceptional price for that front quarter cut ! 

Even here in Aus you couldn't get it for that price !

 

And that front bar will transform the front of the car.

Took me a while but I did it all myself, and I've never done any sort of body work. It's not perfect. I'll definitely be redoing it when it gets a little cooler outside. But here it is! 

Also, going to have to trim the turn signal housings a bit, they won't fit in the bumper/bar because of my FMIC. That's a project for another week. 

20200902_190810.jpg

Well done on that front bar ! 

You'll have to eventually fill in the cut outs where that center cross bar used to be as it will a flex point when you hit those over sized speed humps and parking bollards local councils put in.

I to start practicing your plastic welding skills via YouTube on the interweb ! ! !

 

13 hours ago, trel said:

That looks great mate. Makes me miss my 95 I had years ago. Nice Shepherd in the background there. Great protection. ?

Thank! I actually have a German Shepherd and a Beligian Malinois, definitely a safe home!

9 hours ago, trel said:

Forgot to ask, did you repair and paint yourself?

Yes, I'd never done it before so it's not perfect but neither is the rest of the car so it kind of fits? lol. Need to wetsand it. Eventually I'll have the whole car repainted in QM1 again but that's after the go fast bits :)

11 hours ago, PLYNX said:

Well done on that front bar ! 

You'll have to eventually fill in the cut outs where that center cross bar used to be as it will a flex point when you hit those over sized speed humps and parking bollards local councils put in.

I to start practicing your plastic welding skills via YouTube on the interweb ! ! !

I was actually going to do that but I ran out of time, big care show this weekend that I needed to have the bumper finished for. Thanks! 

  • 3 months later...

Got the Haltech setup (platinum pro, wideband, boost solenoid), 750cc injectors, AEM 340lph fuel pump all installed. Started tuning and at around 4000RPM the clutch started slipping badly. Was making around 275HP when it started slipping. The OSGiken twin that came with the car probably took a lot of abuse in Japan, which explains why it was so hard for me to get use to. I've driven twin and triple plates before and never had an issue.

https://photos.app.goo.gl/1GrhDr6ffKpDRMW7A

New XClutch twin plate rated for 850ft/lbs is being put in tomorrow, and we will resume tuning on Tuesday. Should be plenty for my plans with the car. Will update with tuning results. Probably 290-310?

Plan for early March 2021 or so is to go with a Precision 6062, 4inch stainless from turbo back. Hopefully live around 400-425HP for a bit and then late 2021 do metal head gasket and arp head studs.

Edited by MindlessR33
dyno video link
  • 1 year later...

Been a while since I've updated, made some changes recently and have some new parts on the way!

New wheels: SSR GTX04 in 18x9.5 +22 all around w/ Continental Extreme Contact in 255/35.

Also installed the Nismo shaded side winkers, Nismo door handle protectors, Nismo old logo carbon fiber shift knob. Tinted the car as well, CPX 18% on sides and back and 40% on front.

Full turbo back 3 inch stainless straight pipe, with screamer. 

NEW PARTS COMING:
Pulsar GTX3076R Gen 2
CXRacing thick wall top mount manifold
Tial 38mm wastegate

20220211_170534 (1).jpg

  • 5 weeks later...
On 4/12/2022 at 8:59 AM, Milkmun said:

Looks the goods mate, is the turbo hitting the valve cover? 

It's about 2-3mm off, so VERY close. Can't clock the turbo anymore without the bolts touching. 

  • 2 weeks later...

Lots of delays and incorrect parts shipped. But now she has a Radium fuel rail and 750cc Bosch injectors, so it's almost time to tune. Getting the downpipe fabricated the first weekend or May. 

20220421_205148.jpg

  • 9 months later...

A LOT has happened since my last update.

Got the car back together in May of 22. Took it to get tuned, one of the injectors got stuck open at some point during a pull. Rather than see what may have happened for the tune to suddenly become rich between pulls, the tuner starts cutting fuel until he leans out the other 5 cylinders. Went ahead and did another pull and went to 22 psi on pump gas, cracked ringlands in 4 of 6 pistons and all of them except for the one with the stuck injector had detonation marks all over them. I found all this out after the fact. Tuner shut his shop down soon after, and blew a few other motors that same month.

 

SO... tore it down in June. Ordered new CP 9:1 pistons, Manley H beam rods, ID1050x injectors. Sent the crank off to Countersteer to have it polished, balanced and have a crank collar put on. Upgraded to PRP crank collar and PRP oil pump gears. Had the head decked and refreshed. Repaired/Replaced strut towers, and painted the bay. Now we're just waiting for the block to get back from being honed, decked and cleaned, and then we can start putting her back together. I'm curious of what it will make now though...

PSR GTX3076R Gen2 w/ 0.82 hot side
CxRacing thick wall manifold
CP 9:1 Pistons
Manley H beam rods
HPI FMIC
Cut and shut manifold
ID1050x Injectors
AEM 340LPH pump
GM flex fuel sensor
Haltech Platinum pro

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...