Jump to content
SAU Community

Recommended Posts

All,

 

just bought a dragy and i have to say it is brilliant .

it connects to phone and does gps refresh every .100 sec and quite accurate

 

running on low boost with falken tyre i get a 0-60 of 4.6 sec but if I practice more I think i can get it down to 4 as it doesn’tgrip

 

do you guys shift into 2nd as soon as it is rolling to get fast 0-60 ? If i leave in first then 0-60 is around 5.5 

 

i stick it to 2nd as soon as I have wheel spin and it bounces from red line and then get mid 4

 

on high boost which I haven’t tried (500bhp) i reckon it will be 3.8 if i can get power down

 

on low boost it is 430 bhp 

Link to comment
https://www.sau.com.au/forums/topic/480294-dragy-va-vbox/
Share on other sites

"G4" doesn't give us enough info, there are G4 Fury, G4 Xtreme, G4 Thunder... etc

I'm trying to work out what is your base spring pressure and max boost pressure and if your ECU has traction control functionality. 

If you turn boost control off, how much boost does your turbo make? 

 

 

Link to comment
https://www.sau.com.au/forums/topic/480294-dragy-va-vbox/#findComment-7930164
Share on other sites

It runs at  1 bar spring apology not 1.2

 

ecu is link plug in, see link below

 

https://h-dev.co.uk/product/r34-gtt-rb25det-neo-link-g4-ecu/
 

my tuner at time said it needed some work for traction so we disabled it all together and there is no traction

 

low boost is 1.1 bar and high boost is 1.3 which is changed by a switch

Link to comment
https://www.sau.com.au/forums/topic/480294-dragy-va-vbox/#findComment-7930182
Share on other sites

2 minutes ago, drifter17a said:

How do you guys get grip when accelerating?

 

shift to gear up at expense of less power initially but grip?

Your computer can set lower boost levels in the lower gears.

Different suspension set ups.

Drag friendly tyres.

Link to comment
https://www.sau.com.au/forums/topic/480294-dragy-va-vbox/#findComment-7930188
Share on other sites

12 minutes ago, drifter17a said:

How do you guys get grip when accelerating?

 

shift to gear up at expense of less power initially but grip?

You could lower your base spring pressure to say, 0.5 bar and then use a 4 port mac valve and run a very progressive boost by gear. 

You could setup your traction control. You haven't said why it doesn't work, I'm guessing you need a non-powered wheel speed sensor. 

Stickier tyres as mentioned above. 

Actually I think this has all been said before, this thread and your recent tyre thread.

Link to comment
https://www.sau.com.au/forums/topic/480294-dragy-va-vbox/#findComment-7930189
Share on other sites

  • 2 weeks later...
42 minutes ago, drifter17a said:

Yep and that is not with flooring it

 

0-60 is around 5 sec at best 

got pair of michellen sport 4s so will report back if it got any lower

Let us know what tyre size your running when you report back

Link to comment
https://www.sau.com.au/forums/topic/480294-dragy-va-vbox/#findComment-7930874
Share on other sites

So tyre made a massive difference 

 

pilot 4s rear 275

 

front is pilot 4 which doesn’t really matter for acceleration. 0-60 went from 5.3 to 4.8 a wopping 0.5 sec !!!!

 

it sticks like a glue, i can’t even spin wheel on first or hardly it does. It used to spin like hell on first and second on shitty falken 

Edited by drifter17a
Link to comment
https://www.sau.com.au/forums/topic/480294-dragy-va-vbox/#findComment-7931190
Share on other sites

Dragy is awesome! We use one in my car at roll racing to see if the changes are working. Fastest 100-200 is currently 4.11s, with the old turbo. New one I've done a 4.25 on 30psi in the middle of summer. Should go mid 3s now we've got it turned up if we can get it to hook up. 

Screenshot_20200524-232217_dragy.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/480294-dragy-va-vbox/#findComment-7931591
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...