Jump to content
SAU Community

Battery required for bnr32. Which one?

Matty George
 Share

Recommended Posts

BK Grand Master

BK

Posted
Posted

Here's what I use on the 32 and 33 gtr. Supercharge MF40B20L Goldplus series is a good choice if you want to keep the standard size. I have to use a 40 in the 32 as I have too much shit around that area to run anything bigger. In my 33 it's a 55. The MF40B20L is 390cca and compact, this is the standard physical size for 32 and 33 GTR. The Century MF40 version by comparison is 330cca. MF55B24L is a better choice as they are 490cca, but they are wider. These seem to be my picks as they best available under $200.

After that you go all out with the Optima AGM Yellow tops. By far the best, but approaching $400. They are available at 700cca plus and people have reports of batteries lasting 7 years or more. I don't see the point as Supercharge Gold plus is 40 months no questions asked replacement warranty.

The MF40 is the standard factory size and MF55 is actually the Nissan cold weather pack upgrade size, hence why you can fit both. Same depth and height, just a 55 is wider as mentioned above. So if you can run at least a 55.

More importantly than any battery though is get a Ctek, especially if it is not a daily driven car, which is most GTRs. Need a good maintain charger.

  • Like 1
BK Grand Master

BK

Posted
Posted

@GTSBoyIs that true - as in outright replacement, or is it just the pro-rata

Complete replacement, as in within 40 months of purchase if it fails, full new battery on Gold Plus series. My old man even did one literally at about 39 months from purchase recently on the XR6. I can say I have done it about 3 times across all of my car's ever. The dealer stamps it on purchase, and they are very adamant about retaining and supplying your original receipt upon replacement, but apart from that, yeah no problemo. Sometimes they'll want it overnight to prove it, but if it is stuffed its stuffed and they'll see that.

BK Grand Master

BK

Posted
Posted

Cool, you realise that it is the right positive terminal instead of the left, which is standard in a GTR ? It does have the correct small terminals though.

CCA is also 450 on a 38ah battery.

Does not sound like good value unless it does last you at least 5 -  6 years, as that is the price of 2 x MF55B24 with 490cca and 50ah. I am yet to justify the price of Optima. Happened to have this in the ute for reference:

 

IMG_20200530_175309_2.jpg

BK Grand Master

BK

Posted
Posted

There is absolutely no question they are good, all the serious 4WD and off roader guys run them here. I just couldn't justify $300+ for 38ah and 450cca.

Post back in 5 years and see if it's still going strong ?

BK Grand Master

BK

Posted
Posted

You really don't get what I'm saying do you ? 38ah is the smallest, most piss weak size battery for any car, regardless if it is a $100 or $1000 battery. As I said above 50 minimum is generally the go for any car now, and paying that much for such a small battery just seems silly. Anyway sounds like you went and got one so hope it lasts ok.

When people have been going through the trouble of going to an Optima yellow top they go for the big ones and make them fit for a massive increase in CCA and AH, or to mount them laying down as they are AGM. 

  • Like 1
BK Grand Master

BK

Posted
Posted
On 01/06/2020 at 3:58 PM, GTSBoy said:

NS70MF

650 CCA.

This is essentially the physically largest and largest capacity battery you can drop into the stock location.

image.thumb.png.2e8994f196a4965e93ab86c3655b1948.png

Hey if this is in your 32 , next time you need a battery the Supercharge Goldplus equivalent is the MF80D26. Same dimensions but 80AH and 720cca ?

  • 1 month later...
Matty George Collaborator

Matty George

Posted
  • Author
Posted
On 30/05/2020 at 2:48 PM, BK said:

Here's what I use on the 32 and 33 gtr. Supercharge MF40B20L Goldplus series is a good choice if you want to keep the standard size. I have to use a 40 in the 32 as I have too much shit around that area to run anything bigger. In my 33 it's a 55. The MF40B20L is 390cca and compact, this is the standard physical size for 32 and 33 GTR. The Century MF40 version by comparison is 330cca. MF55B24L is a better choice as they are 490cca, but they are wider. These seem to be my picks as they best available under $200.

After that you go all out with the Optima AGM Yellow tops. By far the best, but approaching $400. They are available at 700cca plus and people have reports of batteries lasting 7 years or more. I don't see the point as Supercharge Gold plus is 40 months no questions asked replacement warranty.

The MF40 is the standard factory size and MF55 is actually the Nissan cold weather pack upgrade size, hence why you can fit both. Same depth and height, just a 55 is wider as mentioned above. So if you can run at least a 55.

More importantly than any battery though is get a Ctek, especially if it is not a daily driven car, which is most GTRs. Need a good maintain charger.

Just an update, took your advice bk and went the supercharge gold plus? Starts awesome and very reasonable price. Went the 55B24.

ERO54N Community Regular

ERO54N

Posted
Posted
On 30/05/2020 at 9:44 PM, BK said:

When people have been going through the trouble of going to an Optima yellow top they go for the big ones and make them fit for a massive increase in CCA and AH, or to mount them laying down as they are AGM. 

Hey Ben,

Awesome insight into the topic.

Quick question, what would be involved with swapping over to Optima Yellow?

  • 2 weeks later...
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • djr81
      R32 update from 1990's spec.

      By djr81 · Posted

      New CAS just turned up from NZ Wiring. Looks like a nice bit of gear.  So, yeah. Triggered, bro. Realised I may as well do the cam belt while mucking about with it so will order one of them.
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
×
×
  • Create New...