Jump to content
SAU Community

Brembos complete package

NISSANGTS
 Share

Recommended Posts

NISSANGTS Mentor

NISSANGTS

Posted
Posted

20200416_151809.thumb.jpg.d5502ee340b2d556b9986a10b2d1c936.jpg20200416_151814.thumb.jpg.e84666d4ad26fadf12a24ac0e3f3e332.jpg20200416_151905.thumb.jpg.ca4354796d568e82cf28d5faac11703c.jpgI am selling this complete brake system that came off nissan 370z front and rear calipers,slotted/vented front discs and vented rear disc also brand new pads front and rear.i have lightly skimmed all disc,s.I was going to install on my r32gtr but unfortunately I need to concentrate on some engine issues.The joy of owning a GTR.

Lmao.

Call stuart 0409135950

$1200.00 plus postage 

 

Link to comment
https://www.sau.com.au/forums/topic/480621-brembos-complete-package/
Share on other sites
Arkhaeon Collaborator

Arkhaeon

Posted
Posted
2 hours ago, Butters said:

r34 gtr has different diameter front caliper bolts, so that statement is not correct :)

Front offsets are different to Skyline Brembos (so must use Z discs with Z calipers). 
Rears are completely different. Bolt diameter, spacing, and offset. You can make them work with a bit of time on a mill, but far from a bolt on. 

  • Like 2
  • 3 weeks later...
«Cyph3r» Experienced

«Cyph3r»

Posted
Posted (edited)

Just adding/confirming some info for interested buyers. These are z33/350z as the 370z/z34 came with Akebono calipers.

The front calipers will bolt straight onto any r34. For an R33/R32/S chassis/Z32 you would need to either drill the knuckles from 12mm to 14mm to fit the bolts required for the calipers, or install a thread insert into the calipers to change them to M12 thread as per the factory calipers. Discs will also work on the front with no issue.

In the rear the Z calipers are significantly different bolt spacing. The PCD seems pretty close as does the offset. A mate has made them fit on his 32 gtst but it will require cutting the knuckles and access to a competent structural welder. Also it's not really suggested for a car that sees street use.

Edited by «Cyph3r»
  • Like 1
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...