Jump to content
SAU Community

Things in gearbox oil.

dyl33
 Share

Recommended Posts

dyl33 Mentor

dyl33

Posted
  • Author
Posted
8 minutes ago, Duncan said:

They are syncroniser clips, and would more commonly be found holding your syncro hubs together.

Did you change your oil for a reason?

Thanks duncan, Is it common for these syncroniser clips to fall out? How long do gearbox's last with them missing?

I had the gearbox rebuilt 2-3 yrs ago but it always felt a little sloppy, still works fine just a little notchy. Thought I'd change the oil...

 

 

 

Duncan Grand Master

Duncan

Posted
Posted

yeah sorry I'm no gearbox expert. I guess it needs to come apart and may as well be checked/rebuilt while out.  The clips/keys hold the synchro hub assembly together and I think there are 3 per hub so perhaps the other one is holding in there for now, I was wondering if it was crunch shifting between a particular pair of gears.

  • Like 1
BK Grand Master

BK

Posted
Posted

Those particular shifting inserts are from the 1st / 2nd gear selector coupling from your main shaft assembly, and as Duncan mentioned there is 3 if them.

image.thumb.png.6b6f127804fcbdb7b37e83a4e18f15a7.png

Only a matter of time before your box will not select 1st or 2nd properly and is totally possible to lock the selector up completely. 

Pull box and get it fixed, or you'll definitely do more serious damage to main shaft gears, synchros or coupling components.

This is absolutely not a "see how it goes" problem - you will kill your box if you don't address this now.

  • Like 4
dyl33 Mentor

dyl33

Posted
  • Author
Posted
10 hours ago, BK said:

Those particular shifting inserts are from the 1st / 2nd gear selector coupling from your main shaft assembly, and as Duncan mentioned there is 3 if them.

image.thumb.png.6b6f127804fcbdb7b37e83a4e18f15a7.png

Only a matter of time before your box will not select 1st or 2nd properly and is totally possible to lock the selector up completely. 

Pull box and get it fixed, or you'll definitely do more serious damage to main shaft gears, synchros or coupling components.

This is absolutely not a "see how it goes" problem - you will kill your box if you don't address this now.

Thanks BK, I'll get some quotes for a rebuild vs. a new box.

Duncan Grand Master

Duncan

Posted
Posted

well, your profile nor post says which car / box, but potentially much cheaper to pull and rebuild. some of the Rb boxes are getting very expensive these days.

Few hours labour for box in and out if you can't do it. 

depending on whether the bearings and synchros are still good to reuse it may just be a few hours to refit the keys.

  • Like 1
BK Grand Master

BK

Posted
Posted
On 07/06/2021 at 9:56 AM, dyl33 said:

Yeah I'm a little annoyed, I knew somthing wasn't 100% right when i picked it up.

It was rebuilt by Gavin Wood Autotech on the Gold Coast, but he has since gone out of business. 

Those solid inserts hold the 2 large circular springs on either side of the 1st / 2nd selector hub for the synchro baulk ring and is the same across all RB 5 speeds.

The 3rd / 4th inserts are a spring type clip and look like this when broken:

image.png.ef1af3390133e5e121cf10cfa8c2f2fb.png

Should look like this:

image.thumb.png.0cf4ec0923cd611d1a04e30656e03aab.png

Its way more common to pop the 3rd / 4th clips. The 3 ways these inserts come out on all gears is from:

1. Incorrect installation as they are pretty fragile.

2. Shifting like a Muppet, banging the gears through and forcing the shift.

3. Using a gearbox oil that is way too thick for the synchro to operate correctly like a diff oil or Shockproof. The thick viscosity actually will have a negative effect on the synchros to do their job and unnaturally load other components like shifting inserts, springs and sliding hubs.

  • Like 1
BK Grand Master

BK

Posted
Posted
On 07/06/2021 at 11:53 AM, Duncan said:

A little off track, but I understand those clips you've shown are series1-2 R33. Apparently s3 R33 had a better designed clip installed and retrofit is possible.

Yes correct, that 3rd / 4th insert is a pre 97 clip. The solid insert on 1st / 2nd never changed but your correct, the 3rd / 4th spring type insert changed on the post 97 boxes to a solid two spring type design.

To retrofit to the later clip on 3rd and 4th requires everything to do with the main shaft 3rd and 4th to be changed including main shaft 3rd / 4th gear, synchro baulk rings, sliding selector collar - everything. Even the 3rd / 4th selector fork needs to be changed as it won't locate into the old selector collar. Its about $800 - $1000 worth of just parts to convert.

All of these parts required for the conversion is also what you need to do to go to a ungraded synchro gearset like a PPG, PAR or OS giken on an old box as they are all designed around the post 97 synchro update on 3rd / 4th - a cost not usually factored in when upgrading a synchro gearset.

  • Like 2
  • 2 weeks later...
BK Grand Master

BK

Posted
Posted
On 20/06/2021 at 10:28 PM, AleksandarR33 said:

They are shift inserts for 3rd & 4th gear, from month/year 06/97 onwards.

No, as mentioned in the original picture they are the 1st / 2nd gear ones.

Why do people with no idea what the hell they're talking about try and chime in on something as fact ?

It is the 1st / 2nd solid insert from the pics.

BK Grand Master

BK

Posted
Posted

You have never built a box then have you.

I have - lots.

The solid ones are for 1st / 2nd, as they have a circular spring either side of them to provide the spring tension. The spring type looking ones are for 3rd / 4th as they are the spring.

Posts like this really shit me as it just contributes to misinformation from internet mechanics. If you don't know what you're on about - don't comment.

See below, same part for multiple Nissan boxes:

Screenshot_20210621-184657.thumb.png.e218a398c7d099edc61a600536fbea6b.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...