Jump to content
SAU Community

Recommended Posts

G’day 

High beams comes on with stalk moved forward to permanently on but won’t work on flash ( inward stalk spring movement ).

does anyone know what it could be ? I have tried cleaning the stalk, is there a separate relay for this, perhaps fuse ? 
 

Also are low beams supposed to go off when stalk is in forward position for highs to stay on ? 
 

 

Link to comment
https://www.sau.com.au/forums/topic/482648-r32-headlight-used-search/
Share on other sites

Yes, with the original factory wiring, when the Hi comes on the Low goes off.

And yes, the flash function (stalk back) uses the brown relay in the engine bay (can't remember off the top of my head if it has a different fuse, but I don't think so).  The hi on function (stalk forward) just uses the switch and no relay is involved

Appreciate it man, I think most probably that brown relay is blown in my case will check anyhow. I just remember it making continued weird noises when I first started working on but did care at that time. 
 

quick question- 

Does the low beam go of with the flash function (stalk back) aswell  ?

Just curious before work on her again.

 

thanks 

sorry, I should add....yes the relay is an easy test/fix because you can just steal one form anywhere else, swap in and flick the headlights.

but also be aware it is getting pretty common for these switches to fail, the full current runs through the switch and they have 30 years of use on them. They are available brand new from nissan

  • Thanks 1

It’s all in the wiring from factory. They were designed to dip the low beams off with high beams on. Just bridge some wires under the steering wheel and off you go. 
Best to replace the headlight switch and add 2 relays to divert the current away from the contacts in the switch and directly to the headlights (hard wired to battery and use the original headlight positive wire as the relay trigger) much better light as they will get a full 12-14 volts and and less stress on the switch contacts as there is no massive current draw

A4624000-6A81-4AFC-85C1-6F21B75FE360.png

B37680E8-4D31-42EC-99FA-6C223A62BBAD.jpeg

2B725DD6-6D84-4F1E-85DA-3ED39BBB5A08.jpeg

@Adam91Thanks man, that’s exactly what I was thinking of doing for the low beams, Also have you bridged it to have them both on same time ?

Anyhow just discovered another problem regarding which I started the thread, 

So what is the neutral position for the high beams on the stalk ?

I think mine is bit noodled up, central position turns high beam on front turns off and have no flash on complete inward spring position. Can someone confirm what positions is turn on off on theirs please. 

On 7/21/2021 at 9:52 PM, Rb25orange said:

So what is the neutral position for the high beams on the stalk ?

I think mine is bit noodled up, central position turns high beam on front turns off and have no flash on complete inward spring position. Can someone confirm what positions is turn on off on theirs please. 

Central is high beams off

Forward towards front of car is high beams on (stays locked forward)

Rearward towards driver is to flash (doesnt stay locked in)

On 21/07/2021 at 9:52 PM, Rb25orange said:

@Adam91Thanks man, that’s exactly what I was thinking of doing for the low beams, Also have you bridged it to have them both on same time ?

Anyhow just discovered another problem regarding which I started the thread, 

So what is the neutral position for the high beams on the stalk ?

I think mine is bit noodled up, central position turns high beam on front turns off and have no flash on complete inward spring position. Can someone confirm what positions is turn on off on theirs please. 

Yes the first pic shows which wires to bridge to make high beams come on with the low beams without dropping the lows out (just like normal cars). Would recommend bridging the wires at the back of the plug (under the steering wheel) with heat shrink rather than the paper clip trick shown in the picture I provided

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...