Jump to content
SAU Community

Recommended Posts

Aww thanks for the warm welcome 

so I purchased an aftermarket front bumper as I kinda…. Umm let’s just say had a minor mishap with my current one, however the one I purchased is just waaaay to low, I bottom out on almost everything.. I don’t know if there’s some way I can lift the front end or do I need to get bigger tyres? I hope that makes sense?? 
 

just wanna know… is it doable without making the car look wak with the front end higher? 

B885B2D9-AB95-4B6F-A511-6AC239AF91FF.png

92892063-95EF-45AB-8B81-F7FE518863DE.jpeg

C867192D-8CDE-4944-8315-8E82D6DD9A54.jpeg

You need to get higher profile tyres, or if your car is lowered (which it looks like it might be), put it back to standard height. Yes it won't look as low and sleek, but alas, you will be able to drive without being terrified of scraping on everything.

Pro tip for your next bumper bar - source a urethane front bar. You basically have to bring one in from the USA, and it will cost a lot, but they are significantly more flexible and forgiving. I killed 3 aftermarket fibreglass front bars before I learnt this tip, and then got a Nismo style urethane and it was amazing and unkillable. You can literally fold them in half and they spring back to their normal shape.

  • Like 1
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...