Jump to content
SAU Community

Recommended Posts

Hey all,

Was looking to get some cams for my R32 GTR and noticed that the popular Tomei Poncam Type B's seem to have two different versions between the USA and Japan.

From Tomei USA's site, for part TA301A-NS05C, the duration is 262 with 9.15mm lift. On the Japanese sites like Nengun or RHDJapan the duration is 260 with 9.15mm lift. Is there different versions between USA and JP spec? I don't think it's a typo since the different US suppliers I check have the same information. Both parts are part number 143005. RHDJapan has them for comparable prices to US suppliers, but Nengun lists them for almost 40,000 yen (400$) more, adding more to my confusion. I wouldn't think that a difference of 2 in duration would make all that much difference but am more concerned about possible differences in materials or manufacturing process. Can anyone shed any light on this? Thank you

 

 

 image.thumb.png.81c5dc136bfc0a8d9271702b4778c2ff.png

image.thumb.png.1834af9256e30909e52fd2c6547c8ac5.png

On 3/6/2022 at 8:57 AM, nouveau_poor said:

Hey all,

Was looking to get some cams for my R32 GTR and noticed that the popular Tomei Poncam Type B's seem to have two different versions between the USA and Japan.

From Tomei USA's site, for part TA301A-NS05C, the duration is 262 with 9.15mm lift. On the Japanese sites like Nengun or RHDJapan the duration is 260 with 9.15mm lift. Is there different versions between USA and JP spec? I don't think it's a typo since the different US suppliers I check have the same information. Both parts are part number 143005. RHDJapan has them for comparable prices to US suppliers, but Nengun lists them for almost 40,000 yen (400$) more, adding more to my confusion. I wouldn't think that a difference of 2 in duration would make all that much difference but am more concerned about possible differences in materials or manufacturing process. Can anyone shed any light on this? Thank you

There's a lot of drama around Tomei USA, you can look at this post to get an idea: https://www.ft86club.com/forums/showthread.php?t=134044

Personally I don't buy Tomei USA parts because in the groups I'm in I've seen people get Tomei USA cams that don't even fit in the engine because they were machined so far off from correct. On top of this I have seen people claim that they have gotten head gaskets that were faulty from the very first turn of the key. Obviously there's some doubt as to whether the machine shop/engine builder adhered to all the necessary requirements to ensure that the deck/head were properly prepped and all that fun stuff but they claimed it was. That combined with a few other people mentioning issues they've heard was enough that I will never buy a Tomei USA part. If you think spending a little more on shipping to get a camshaft is expensive I would probably think hard about the cost of potentially having to do a camshaft replacement twice or having to spend weeks RMAing your part to Tomei USA and getting a replacement that may or may not be any better.

Also, consider what your goal is with these cams. If you want better response more cam duration is probably counterproductive which is why Tomei JP makes the type R Poncam. The 260 cams cause mild idle lumpiness which you may find desirable but is caused by poor combustion stability at idle.

  • Like 1

Thanks for the feedback both. Reason I ask is that they seem to be a popular modest cam to pair with Garrett -5 turbos, where I'm shooting for the 450-500hp range. An opportunity came up where I could get them BNIB off somebody going a different direction with their build for about 1/3 the normal retail price. Really has me eying them. I'll read through the TomeiUSA forum post that was provided 

Finished reading around a bit. So with the official announcement was in 2019, anyone know when Tomei JP stopped supplying cams to Tomei USA from Japan or if Tomei USA has always made their own cams? Definitely going to dig further

Yeah, more searching around was enough to spook me away from them even if the full details about their relationship isn't completely clear. The discount is huge but maybe the above is the reason why, now that I think about it. Not keen on risking an ill fitting cam, or worse a snapped one. 

Will check out the Kelfords. Any strong opinions on similar spec HKS cams? Seem to be close in pricepoint and I've been very pleased with the other parts they produce. 

On 3/6/2022 at 5:38 PM, nouveau_poor said:

Finished reading around a bit. So with the official announcement was in 2019, anyone know when Tomei JP stopped supplying cams to Tomei USA from Japan or if Tomei USA has always made their own cams? Definitely going to dig further

Tomei USA made the change a while back to their own spec cams to cut cost, I don't recall when exactly it happened though. WD's experience with snapped Tomei cams is possibly a crappy casting but I wouldn't be surprised if the previous owner just completely failed to adhere to proper procedure setting timing belt tension or installing the cams. Tomei JP's cams are made in-house although not all of their components are built in-house. The stories and photos I saw were not posted to Youtube or anything like that, it was a local private Facebook group.

HKS' cams are fairly conservative with valve lift so I don't know if it makes any sense to go with them, you can go up to ~9.15mm before you have to clearance the head for a high lift camshaft. Something I've wondered for a while now is just how much of the improvement with these drop-in cams can actually be attributed to the lift/duration changes when they seem to be making non-trivial changes to cam timing as well.

  • Like 1

Kelford would be the best option. More lift and not over hyped products from 2002.
Email Kelford with what you want to achieve and get what they recommend, probably even do valve springs at same time.

  • Like 2
On 3/6/2022 at 10:48 PM, joshuaho96 said:

Something I've wondered for a while now is just how much of the improvement with these drop-in cams can actually be attributed to the lift/duration changes when they seem to be making non-trivial changes to cam timing as well.

I think I've read in another thread that one of the best "simple" changes to the engine one can do is to tune some adjustable cam gears and that even on factory camshafts a gear tune can give additional power.

Maybe there is a compare and contrast thread out there for the same engine setup. One with factory gears/cams, one with adjusted gears/factory cams, one with one with adjusted gears/aftermarket drop in cams. 

On 3/11/2022 at 8:15 PM, nouveau_poor said:

I think I've read in another thread that one of the best "simple" changes to the engine one can do is to tune some adjustable cam gears and that even on factory camshafts a gear tune can give additional power.

Maybe there is a compare and contrast thread out there for the same engine setup. One with factory gears/cams, one with adjusted gears/factory cams, one with one with adjusted gears/aftermarket drop in cams. 

The centerlines on most aftermarket cams are different from stock, so keeping the same settings on aftermarket cams after adjusting for stock wouldn't make sense necessarily. You'd want to try stock cams + timing, then aftermarket drop-in cams at their default timing, then use the cam gears to adjust the timing back to be the same as stock cams.

Also, don't forget to torque those cam gears to spec and use blue loctite because otherwise this can happen and you'll bend a bunch of valves and maybe destroy your head too: https://www.youtube.com/watch?v=kI7GFPYDtOo&t=625s

Edited by joshuaho96
  • Like 1
On 3/12/2022 at 2:02 AM, joshuaho96 said:

Also, don't forget to torque those cam gears to spec and use blue loctite because otherwise this can happen and you'll bend a bunch of valves and maybe destroy your head too: https://www.youtube.com/watch?v=kI7GFPYDtOo&t=625s

Dang, wonder how that works out with the tuner. Do they fund a new engine or a different way to make it square?

On 3/12/2022 at 12:16 PM, nouveau_poor said:

Dang, wonder how that works out with the tuner. Do they fund a new engine or a different way to make it square?

Knowing who built the engine he will probably be taken care of but for normal people it's pretty fair to say if this happens you are 100% SOL unless the same shop that builds the engine is also doing the tune for it. 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...