Jump to content
SAU Community

RB25 Starting Issues, Possible The CAS

tylink720
 Share

Recommended Posts

tylink720 Contributor

tylink720

Posted
Posted

Hey,

I'm having some starting issues with my rb25det neo. Its in a pretty much stock R34 GTT with an Elite 2000. It will just crank and not start, but sometimes will fire right up. I'm wondering if its my CAS that is the issue, but once it does start, it seems to run great.

It started this year after the Haltech install. Never had an issue before, and it worked perfectly for a week after installing the haltech too. The first time it happened, I could smell unburnt fuel, so I pulled the fuel pump fuse and it started up, so I thought it was just flooded. Now that doesn't work. 

I put the timing light on it again, and the crank timing marks were nowhere to be found. Took the cas off thinking the key snapped, but it was fine. Put it back on and it started, and I checked the timing again and it was lined back up. Its almost like the ecu was seeing the timing 180 degrees out somehow. This has happened multiple times now, including this morning.

Some things I've tried:

  • I've taken out each coilpack and I get spark from all of them while turning my cas, and I hear the injectors clicking too.
  • I've synched my timing with the ecu each time.
  • I've cleaned the cas with sensor cleaner.
  • I've logged the ecu while cranking and it's getting signal from the cas.
  • I've looked over some wiring and can't see frays or anything. 
  • Double checked my trigger settings, and they are the same as the original base map

I'm nervous to drive around now as it seems to be random when it wants to start. And it seems strange that once it actually starts, it runs great. Any ideas? I don't know anyone with a confirmed working cas otherwise I'd try swapping to see it it helped. 
 

robbo_rb180 Grand Master

robbo_rb180

Posted
Posted

What is the condition of your battery as voltage may be dropping below arming/trigger setting. Adjust them if need be.

Check that and if not the problem invest in a NZwiring trigger kit. Super easy to install and setup too.
https://www.nzwiring.com/index.php/product/trigger-kit/

  • Like 2
tylink720 Contributor

tylink720

Posted
  • Author
Posted

Hey thanks for the reply. Yep I've been looking at some trigger kits so I might just have to take the plunge and buy one.

The battery seems to be good, and I've also tried starting while being jumped by another running car, with no luck. I will see if I can find the those voltage settings in the ECU and give it a go.

tylink720 Contributor

tylink720

Posted
  • Author
Posted

Update on this:

I got the car sketchily started and made it home now. I had to add 40 degrees to the TDC Angle setting in the Haltech and then it barely started but idled like crap. Put the timing light on it and sure enough the timing was out by about the 40 degrees. I put the same number I had before back in, 115, and its back to proper timing and idled fine.  

Somethings off when its cranking it seems. I'm planning on just buying the trigger kit now

joshuaho96 Veteran

joshuaho96

Posted
Posted
On 6/21/2022 at 9:09 AM, tylink720 said:

Update on this:

I got the car sketchily started and made it home now. I had to add 40 degrees to the TDC Angle setting in the Haltech and then it barely started but idled like crap. Put the timing light on it and sure enough the timing was out by about the 40 degrees. I put the same number I had before back in, 115, and its back to proper timing and idled fine.  

Somethings off when its cranking it seems. I'm planning on just buying the trigger kit now

Scope the signal the ECU sees during cranking. This sounds like it could be a signal integrity issue.

tylink720 Contributor

tylink720

Posted
  • Author
Posted
On 6/21/2022 at 4:44 PM, joshuaho96 said:

Scope the signal the ECU sees during cranking. This sounds like it could be a signal integrity issue.

I will try this as well thanks. I've ordered up the NZ Wiring kit so hopefully that will be here soon too

  • Like 1
  • 2 weeks later...
tylink720 Contributor

tylink720

Posted
  • Author
Posted

Another update for this. I put the NZ Wiring trigger kit on and it was doing the same thing. Scoped the signals and was getting perfect readings off of it. 

Ended up going through all of my fuses again and found one had blown, one of these ENG CONT fuses.image.thumb.png.3115d0907a47a0d115022a1c07edca46.png

Replaced it and the last 3 starts have been flawless. I'm hoping that this is finally the fix for it!

Side note, what do these 2 fuses actually do? I'm wondering how the car was even able to run if it was blown?


 

Duncan Grand Master

Duncan

Posted
Posted

Yes, but the weird thing is, a standard 33 gtst runs fine with that fuse blown, while at least some aftermarket ECUs need it (it was actually absent from factory in S2 which is even weirder.) I've never traced the wiring for it though

  • Like 1
  • 3 weeks later...
tylink720 Contributor

tylink720

Posted
  • Author
Posted (edited)

The starting issue seems to be fixed due to replacing that fuse. I also emailed NZ Wiring and he gave me some tips and I have the car working very well now. Had to lower my trigger arming voltages a lot compared to the numbers in the install instructions. Thanks for the help!

I do get a trigger error once every couple of drives. It seems to happen when I press in the clutch during a lower rpm decel, or when letting out the clutch at a low rpms. It will happen once, then wont come up again for the rest of the drive or even multiple drives after. Strange

Edited by tylink720

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...