Jump to content
SAU Community

Recommended Posts

If you do this....

2 hours ago, nitznair said:

Better to get an engineer on board from the get go.

...then you don't have to worry so much about this....

3 hours ago, nitznair said:

if there are any issues arising from the conversion, that are picked during the certification process, the conversion shop can rectify them there and then

Besides, if it were me, I'd be wanting to know I had a shop close to home that is useful for such things anyway.

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13 minutes ago, MrRx7s3 said:

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Damn man! Stock cats should pass emissions aye? Do you know of any other "trusted" engineers mate? 

Man my r34 was basically stock and failed with stock cat by a mile, ended up getting a euro 5 spec cat installed and just passed... also before you go for the test go for a nice spirited 30-45 minute drive get the cat nice and hot.

even the bloke at the testing centre was telling me that this law is pathetic, they want a 20+ year old car to pass emissions as if it were brand new, he also said that if you get a brand new car put a few hundred kms on it and it will fail emissions... I'll shoot my engineer a message see if he knows someone, he was great very helpful and half the price of everyone else.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 minutes ago, MrRx7s3 said:

Man my r34 was basically stock and failed with stock cat by a mile, ended up getting a euro 5 spec cat installed and just passed... also before you go for the test go for a nice spirited 30-45 minute drive get the cat nice and hot.

even the bloke at the testing centre was telling me that this law is pathetic, they want a 20+ year old car to pass emissions as if it were brand new, he also said that if you get a brand new car put a few hundred kms on it and it will fail emissions... I'll shoot my engineer a message see if he knows someone, he was great very helpful and half the price of everyone else.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ohhhh it has to pass current emissions standards? That's f**ked! Lol. Mines a 2003 V35 Skyline, thats going to be LS swapped 😂😂

That would be really helpful bro. Do let me know if he replies please. 

9 hours ago, nitznair said:

Ohhhh it has to pass current emissions standards? That's f**ked! Lol. Mines a 2003 V35 Skyline, thats going to be LS swapped 😂😂

That would be really helpful bro. Do let me know if he replies please. 

No it doesn't. It has to meet the standards that was in place at the time the vehicle was constructed. 

If your car was, I think, older then 1985, then you don't need an emissions test as there were no emissions standards/requirements at that time. 

If you are having trouble passing emissions, have a chat with a good tuner. It's not 'hard' to pass emissions, the car just has to be setup to pass emissions....  again this just adds to the overall cost involved in getting your certification. 

I am 100% confident that I could tune/setup a skyline to pass emissions and I'm not a professional tuner by trade.

21 hours ago, MrRx7s3 said:

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

I once hinted that a supercharged engine would probably fail (because of emissions) and man did i get burnt by an angry member.

PS: you may wish to edit your post and remove all the carriage returns. I had to take it out of the above quote.

Edited by Vee37
4 minutes ago, nitznair said:

Would putting on a bunch of catalytic converters lower emissions? 

Say for example you have 4 cats on your exhaust, instead of the usual 2

No, the cat needs to come up to temperature before it works. Plugging up the exhaust with multiple cats will not help you.

Just get a good quality euro 5 or 6, 400+ cell cat and you'll be fine.

17 minutes ago, Murray_Calavera said:

No, the cat needs to come up to temperature before it works. Plugging up the exhaust with multiple cats will not help you.

Just get a good quality euro 5 or 6, 400+ cell cat and you'll be fine.

And then once you pass emissions, get a custom straight pipe done aye? 🤣

Once you get the engineers, its just doing pink slips yearly and rego? No more dramas yeah? 

correct, except importantly you can get defected at any time if the police *think* your car may not be legal, engineered or not. You will need to have the car re-inspected if so which would include checking back to the engineered details

2 minutes ago, Duncan said:

correct, except importantly you can get defected at any time if the police *think* your car may not be legal, engineered or not. You will need to have the car re-inspected if so which would include checking back to the engineered details

Ahhh gotcha. Yep no silly things like dark tints, slammed to the ground, overly loud exhaust, driving like a dumb flamin mongrel etc aye 🤣🤣. Just try to look and drive as "stock" as possible 😉🤣🤣

2 hours ago, nitznair said:

Yep no silly things like

2 hours ago, nitznair said:

a custom straight pipe

You would be best to retain a cat. A nice big low cell count cat will do something to clean up the exhaust and largely prevent the big black stain that would be a giveaway to the above if you just had a 1 cell cat.

  • Like 1
3 minutes ago, GTSBoy said:

You would be best to retain a cat. A nice big low cell count cat will do something to clean up the exhaust and largely prevent the big black stain that would be a giveaway to the above if you just had a 1 cell cat.

Ohh that's good advice man. Like a 100 cell or something aye? 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...