Jump to content
SAU Community

Recommended Posts

Hello all, 

I have just bought my 1992 R32 GTS and have found that the headlight lowbeams are permanently on and cannot seem to fix it.
I unplugged the switch and they stayed on, unplugged the relay and still stayed on.

Wondering if anyone has any advice before I start tracing all the wires back looking for the problem.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/485734-r32-gts-headlights-staying-on/
Share on other sites

35 minutes ago, slow32de said:

Wondering if anyone has any advice before I start tracing all the wires back looking for the problem.

That's not going to happen, given...

35 minutes ago, slow32de said:

I unplugged the switch and they stayed on, unplugged the relay and still stayed on.

Because that shot should be categorically impossible. Stock circuit goes direct from dash switch/dimmer to globes.

Someone might have added relays and f**ked that up, so that the relays stay on regardless of the control side being on/off/unplugged.

There's a big 3 pin connector (H4 style) behind each headlight that carries the Lo, Hi and earth wires, that plugs into a subloom that breaks out to connect to the separate Lo and Hi globes in the headlight. If there are relays added, they should be there, because it is the easiest place to intercept the stock wiring and interpose something else.

 

Question: on a stock 32 when the lights are turned on at the dash switch do they turn themselves off when the ignition is off

Assumption: possibly someone wired them so the lights come on/off with the ignition as a simple hack because they always drove with the headlights on....maybe

With most modern cars the lights go out when the ignition is switched off and a door is opened, or after some time, some older cars do this, some don't

I personally always drive with my headlights on, day or night, that is a possible hack that I have considered for my MX5 which beeps at me every time I get out the car because I forgot to turn off the headlights, unlike my VX SS where the lights come on and off with the ignition 

What I recommend:
"H4 relay harness" for your Headlights, the R32 switch is passed though the headlight circuit, so it's common to see burn out switches because people have used "100W H3" or H3C bulbs, they are all shit.

ALL BLUE TINTED BULBS ARE SHIT

no matter what instagram ad you saw, every single HID/LED/whatever bulb is shit.

Trust me, been there done that, every halogen bulb is shit.

 

Your only real upgrade path is to retrofit proper HID projectors and ballast (or equivalent Koito LED projectors).

trust me when i say i've been there done that, no replacement for displacement.

 

And that's saying with me driving a BMW F45 with factory LED bi-LED, and my R32 having aftermaket bi-Xenon (morimoto d4s)

 

you cannot argue with physics

4 hours ago, Duncan said:

Before you go too far with this, just make sure it is indeed the headlights on, and not the foglights (switch on the dash surround). Also, are the taillights always on?

Tails are always on aswell even when the car is fully off, I’ve been having to disconnect the battery.

By the looks of it the bloke must’ve messed around with all the light wiring so I’m just going to go through and redo it all. 

On 8/15/2024 at 2:01 AM, niZmO_Man said:

What I recommend:
"H4 relay harness" for your Headlights, the R32 switch is passed though the headlight circuit, so it's common to see burn out switches because people have used "100W H3" or H3C bulbs, they are all shit.

ALL BLUE TINTED BULBS ARE SHIT

no matter what instagram ad you saw, every single HID/LED/whatever bulb is shit.

Trust me, been there done that, every halogen bulb is shit.

 

Your only real upgrade path is to retrofit proper HID projectors and ballast (or equivalent Koito LED projectors).

trust me when i say i've been there done that, no replacement for displacement.

 

And that's saying with me driving a BMW F45 with factory LED bi-LED, and my R32 having aftermaket bi-Xenon (morimoto d4s)

 

you cannot argue with physics

I’ll have to have a look at them then, looks like old mate messed around with the wiring and rooted it. 

7 hours ago, Duncan said:

Before you go too far with this, just make sure it is indeed the headlights on, and not the foglights (switch on the dash surround). Also, are the taillights always on?

That switch turns the tail lights on.

On 13/08/2024 at 1:29 PM, slow32de said:

Hello all, 

I have just bought my 1992 R32 GTS and have found that the headlight lowbeams are permanently on and cannot seem to fix it.
I unplugged the switch and they stayed on, unplugged the relay and still stayed on.

Wondering if anyone has any advice before I start tracing all the wires back looking for the problem.

Thanks

This happened to me, Its an easy fix.

The control switch you use to turn on the lights have metal 'tags' inside that switch between the options on your knob. those tags wear out and can easily short.

I bit the bullet and bought another light switch. unfortunately i had to buy the whole surround to get that switch hahaha

6 hours ago, R32RB20 said:

The control switch you use to turn on the lights have metal 'tags' inside that switch between the options on your knob. those tags wear out and can easily short.

Yeah nah, because:

On 8/13/2024 at 12:59 PM, slow32de said:

I unplugged the switch and they stayed on, unplugged the relay and still stayed on.

Something is well f**ked up on this one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...