Jump to content
SAU Community

Recommended Posts

35 minutes ago, MBS206 said:

Is Chris from Craved Coatings still around? He is an ex SAU guy and did great powder coating (back in the day at least)

He is around but doesn’t really do automotive stuff anymore, mainly does commercial work now 

Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996314
Share on other sites

20 hours ago, Dose Pipe Sutututu said:

full send the cnut, do this

image.thumb.png.5ce43ccee87bcdbd1ca431707e67c09a.png

 

fark the wrapping and/or stick on siet.

These guys are the ones to go to:

https://www.realthermo.com.au/

 

Got a quote back

Manifold is $1500 and the dump $740

My only concern is the stainless dump, and the possibility of it cracking, I need to look into it more IRT the dump

It does look like it would be the best method though, albeit a costly best method

Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996317
Share on other sites

2 hours ago, Dose Pipe Sutututu said:

You know the saying, a poor man pays twice, sometimes fourice lol.

Source: This thread, and the thread this thread spawned from.

Alternative take:

Is heat actually an issue for the use case of this vehicle? I wonder if it actually would be.

Nekminit

image.thumb.png.2236e66ea1e806550edc61abe873fb98.png

  • Haha 3
Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996321
Share on other sites

7 hours ago, Kinkstaah said:

Source: This thread, and the thread this thread spawned from.

Alternative take:

Is heat actually an issue for the use case of this vehicle? I wonder if it actually would be.

Nekminit

image.thumb.png.2236e66ea1e806550edc61abe873fb98.png

Thanks for that....

If only I could do something once and be happy with that, like some people do....

  • Haha 1
Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996331
Share on other sites

I just rolled over "my" first 10k km in the MX5

Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads

I've been on leave since early November but unfortunately need to go back to work on 19 January

Luckily though I still have a fair chunk of leave left to burn until....

Screenshot_20250109_154801_Countdown.thumb.jpg.409ce25c3dbd18a8c56fca2d2a5ac96e.jpg

Not that I'm counting 😁

  • Like 4
Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996558
Share on other sites

Corvette thread then? Don't say I didn't predict the future again.

"I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..."

I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.

  • Haha 2
Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996560
Share on other sites

1 hour ago, Kinkstaah said:

Corvette thread then? Don't say I didn't predict the future again.

"I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..."

Please just buy my car. You can fit people in it too.

Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street

As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷

If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire

I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around

I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k

And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet

I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy 

Maybe I should just buy a Brumby for a little "work hack".....LOL

I use to be indecisive, but now I'm not sure

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996562
Share on other sites

Dropped the MX5 of this morning to get the hardtop colour matched and some PDR done, they are also going to give it a buff to remove some "stubborn" swirl marks and light scratches in the clear coat

Over the last few months the poor little thing has copped some shopping centre car park abuse, I try to not park in them, but hitting Westfield's a few times over the last few months has taken its toll, nothing really bad, but enough of a trigger for a "while we're in there" thingie 

Once it's back and all the one colour, with a few dents and mark's removed I'll give some of these products a go and see what they're like

SCA_707128_hi-res.thumb.jpg.bc2d45c8ac5c12789581bf1f557b25a6.jpgSCA_707131-00_hi-res.thumb.jpg.70df60c0977deea862f67f79a1f0b036.jpgSCA_707122_hi-res.thumb.jpg.fcbb5c6861ff6c9d32e5634cd7a7489d.jpg

 

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996716
Share on other sites

More than happy with the colour match

Talking to the painter he recommended to give the top a few weeks for the paint to 100% cure prior to sealing it with the ceramic stuff

20250117_150059.thumb.jpg.3e877844843a95c1fcfd976765a2c61e.jpg

Also, because why not..... I have a fancy pants Fluidampr harmonic balancer on order, the 2.5 engine uses the OEM 2.0 balancer off the old motor as the 2.5 balancer is a larger unit and doesn't fit clearance wise, which, because the two engines have different harmonics, isn't optimal, the OEM balancer does the job, but as the gear driven balancer in the bottom end is removed to fit a RWD application there is slightly more vibration, the Fluidampr helps with the harmonics that the gear driven balancer once took care of,  basically makes life easier on the oil pump and bearings when thrashing it around

2977eecd5d4f13cc3e23e842daf52a01_960x.thumb.jpg.608dec31c48a44d83849d73d9b94ac68.jpg

Hopefully the weather gets better soon because I'm keen for some cruising around, and currently, with the winds and storms we are getting, the amount of detritus being blown around from trees on the road isn't something I want to be driving around in

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996783
Share on other sites

8 hours ago, Milkmun said:

Wow the colour matched hard top completely transforms the car.

Are there any nice front lip options for the car or is that off the table?

Yeah, really happy with how it all turned out

As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere 

I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height

As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996791
Share on other sites

Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL

So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse

20250118_083148.thumb.jpg.081521c8e4bd4a62c0ebc087448ec4a8.jpg20250118_083202.thumb.jpg.4901e909b8bf05bea02cf342af5f5635.jpg20250118_083218.thumb.jpg.35a1dc702f25c31b7b51b4286097e979.jpg

Serves me right for staying at work and getting on the cans with some of the boys

  • Sad 6
Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996792
Share on other sites

As the MX5 isn't apparently "manly" enough, and I need something for runs to the local shops, and also take to my part time job at the salon, basically I can keep the MX5 away from car parks and stuff......like "flying lockers", I was wondering what I could buy to fix this issue

LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1

download(13).jpeg.6a06b5bdb45351a6482c57efa3a2781b.jpeg

 

 

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996825
Share on other sites

1 hour ago, The Bogan said:

LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1

Oh wow, it's easy to forget how cheap these can be. Probably the cheapest way to travel. Though people in cars here tend to be morons and I would not feel very safe.

Were scooters ever big in Australia? It used to be the thing growing up in Europe ~20 years ago. 50/70/125ccm Peugeot or Yamaha and some others. Utterly obnoxious Polini race exhausts. Kick stands that slant as much as possible. So loud. So much noise for really not moving very fast at all. But it felt cool at the time.

Not sure where I'm going with this, but there is an aftermarket for mopeds! Though I'd have pictured you more for a Goldwing kind of guy after growing out of the Harley.

Link to comment
https://www.sau.com.au/forums/topic/486007-nc-mx5/page/3/#findComment-7996827
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...