Jump to content
SAU Community

Recommended Posts

Hello everyone,

I am from Malta and have recently bought myself a fully stock 1992 Nissan Skyline GTS. It has the RB20DE engine and thus is NA.
Unfortunately, not a lot of information can be found online related to the GTS, unlike the information for GTS-T and GTR variants.

Apart of the Skyline, I also got a 1984 Porsche 924 2.0l NA and a 2002 Renault Clio 1.5DCi for everyday use.

Excited to be apart of the community and perhaps get better information on cars such as the GTS.

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/486045-new-owner-of-a-skyline-r32-gts/
Share on other sites

Welcome.

1 hour ago, GabsReDeal said:

Unfortunately, not a lot of information can be found online related to the GTS, unlike the information for GTS-T and GTR variants.

This is not really true. We have a whole forum here just for the NA shitboxen. And they are not very different from the turbo shitboxen. Just weaker brakes and gearboxes, and no LSD, for the most part.

16 minutes ago, GTSBoy said:

Welcome.

This is not really true. We have a whole forum here just for the NA shitboxen. And they are not very different from the turbo shitboxen. Just weaker brakes and gearboxes, and no LSD, for the most part.

And half of them have been converted to turbos.

  • Haha 2
1 hour ago, Ozdavroz said:

Welcome Gabriel.

At least your car has a glorious RB and not the shitty CA18. As MBS206 mentioned all the good bits can be added later.

Two doors or four?

It is a two door. It is black and also still has the OEM wheels and stereo.

Exact model would be KR_R32RGFEL_SS

According to GTR-Registry.com is a 2 Door Coupe; RB20DE; 2WD no HICAS; MT.F5; (11L) Projector Headlamps and Fog Lights; (12_) Electronic Active Full Auto Air Con (Climate Control); (13-14SS) V Selection -- Which seems to be accurate description of my variant.

Will try to upload a few pictures soon.

The OEM wheels look like the below image. Image is taken from the goo-net-exchange website.spacer.png

 

5 hours ago, PranK said:

These look like S13 wheels. 

And Welcome! 

image.png

Exactly, when searching online they were a lot more common on S13s, but have seen quite a few of Skyline GTSs with them as well.

Yeah everyone always seems to refer to them as S13 wheels however they came on R32 Skyline, A31 Cefiro, C33 Laurel etc., and also came polished diamond cut or painted depending on the model.

Congrats on your GTS purchase! I'd personally leave it NA. :)

  • Like 1

Wow! It looks like those photos were taken in 1989. I don't think I've ever seen an R32 so high off the ground before. Straight out of the brochure!

There's all sort of typical mods you could do - wheels, lowering, body kit, etc etc..... but I'd be tempted to leave it like that.

  • Like 1

Thanks for the nice comments, I really appreciate it. 

6 hours ago, Ozdavroz said:

Very clean car, are you keeping it stock or planning any mods?

Regarding mods, I am planning of keeping it mostly stock. The only possible future mods I am thinking of are new wheels, perhaps sports shocks or coilovers, and was about to do a cat delete on Monday (However, I am unsure about this and I am getting cold feet). Despite this modifications, I'd still keep all the original wheels/parts.

8 hours ago, GabsReDeal said:

and was about to do a cat delete on Monday

Don't bother. The poor little RB20 doesn't make enough gas flow to challenge the flow capabilities of even the littlest cat, and you won't make any extra power, and all you'll do it soot up your rear bumper.

Plus....is Malta not runing under Euro regs?

  • Like 2
22 minutes ago, GTSBoy said:

Don't bother. The poor little RB20 doesn't make enough gas flow to challenge the flow capabilities of even the littlest cat, and you won't make any extra power, and all you'll do it soot up your rear bumper.

Plus....is Malta not runing under Euro regs?

Thanks for your insight, it being basically useless will impact my decision for sure. I thought it may help the engine breath better I guess. But then again, I have also been told that tuning an RB20DE is also not worth it.

Exactly, we follow EU Regulations. There is a bit more leeway on older vehicles. My Porsche 924 came without a cat from factory and managed to pass, they still mentioned that I have quite high emissions on it though.

  • Like 1

Welcome. 

That is a very nice looking vehicle.  Please  whatever mods you do, keep the original parts and make sure it can be put back.

As others have mentioned, cat delete wont help with power. All it will probably do is hurt emissions. 

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...