Jump to content
SAU Community

Recommended Posts

My friend just said a turbo engine last around 150k where as N/A cars last longer.

Is that true?

Only 150k?

What then? Engine rebuild? Get engine from half cuts?

Costing?

This is so heart killing! I never heard such :bs!: before... (or I am just plain stupid and know nothing about engines)

I mean, that metal thing under the bonnet I paid so much cash is not gonna only last 150k!!!!!

Link to comment
https://www.sau.com.au/forums/topic/48960-how-long-does-a-turbo-engine-last/
Share on other sites

Shoot your friend in the head so he stops spreading complete and utter bullsh1t...

Your engine, if kept in good condition and serviced regularly and kept in standard guise will last many hundreds of thousands of kms.

As you modify it, and extract more power out of it, the expected life of the engine decreases accordingly. You can't expect a 300rwkw RB25 to last as long as a stock one right?

As one person on the forums likes to say: "A candle that burns twice as bright, lasts half as long"

im that friend hehe..

im only stating what ive seen from experience..

i've seen 2 turbo engines die at 150,000km even though they got serviced regularly and midly modded..

its different for everyone of course..

it probably won't die but it will probably start showing few probs unless ur a granny driver or have it bone stock..

im that friend hehe..

im only stating what ive seen from experience..

i've seen 2 turbo engines die at 150,000km even though they got serviced regularly and midly modded..

its different for everyone of course..

it probably won't die but it will probably start showing few probs unless ur a granny driver or have it bone stock..

im that friend hehe.. its not compete bullshit.. jus depends on the circumstances..

im only stating what ive seen from experience..

i've seen 2 turbo engines die at 150,000km even though they got serviced regularly and midly modded..

its different for everyone of course..

it probably won't die but it will probably start showing few probs unless ur a granny driver or have it bone stock..

im that friend hehe.. its not compete bullshit.. jus depends on the circumstances..

im only stating what ive seen from experience..

i've seen 2 turbo engines die at 150,000km even though they got serviced regularly and midly modded..

its different for everyone of course..

it probably won't die but it will probably start showing few probs unless ur a granny driver or have it bone stock..

saying that a turbo engine will only last "around 150k" kms, as stated by supra, is COMPLETE AND UTTER BULLSH1T.

And seeing 2 engines die at 150,000kms doesn't give you any authority to go around spreading such lavicious and contemptuous lies...

I've seen 2 or 3 N/A engines die at under 50,000kms... Should I go around telling people that N/A engines only last 50,000kms? :)

i've seen 2 turbo engines die at 150,000km even though they got serviced regularly and midly modded..

even if they were "150,000km" they could have really done 250,000.. so you can't really tell off the listed km. Again, maybe its regularly serviced - but by who and using what quality items, and how well has it been tuned? And maybe now they are "mildly modified" but in Japan they could have had a T67 strapped to its side for 10 years of its life and how would you know? And how do you have absolutely any firm idea of how they've been serviced in Japan before arriving in Australia or how it was treated?? So I still call :bs!: on your ass..

But sure, more forces, blah, blah on a turbo engine but don't forget they are tested WITH a turbo for long-life and built with similarly stronger internal components. Its like saying an 8 cylinder car with 200kw will last less than a 4cylinder car with 80kw.. its simply not true.

nothing u guys have stated necessarily mean thru god and all his almighty power that they won't fail either..

i agree my first state was misleading but i have corrected myself..

anyways.. disregarding this 'sense of authority' and 'utter bullshit'

it depends on the driver, how they drive their car and their circumstances as i have said earlier which is not bullshit..

All I can say is, If you give me a N/A car to drive I will bet it won’t get past 50,000km untill it dies. But if a grammar drove the same car from 0ks. It would last 300,000kms

Likes wise, with a Turbo Charged car.

But..... you have to weigh up the difference, When a N/A car goes full noise the pistons, rods and crank don’t move any where as fast, as what a Turbo car does, so naturally theirs going to be more wear on a Turbo car then N/A car.

my turbo engine only lasted 1 day.

c'mon seriously, how could you say a whole class of engines is worse than another type? You might as well say Honda engines are crap and holden ones are great. They are all different, have different purposes, outputs etc etc etc.

One thing is true for sure, its easier to break a turbo engine. Just turn up the boost, leave the stock computer, rev it to the redline all the time, turn it off hot, don't warm it up, put in bad quality oil every 10000klm.

Treat it properly with good tuning, within its designed limits and it will be *fine*

Basically all the things that your skyline boy-racer likes doing.

any RB motor lasts for ages, mine has had no problems and a mate of mine has a VL commodore and it has done 350 000km and it is still running like new.it has never caused him major problems exept for little oil leaks but thats about it.

One thing is true for sure, its easier to break a turbo engine. Just turn up the boost, leave the stock computer, rev it to the redline all the time, turn it off hot, don't warm it up, put in bad quality oil every 10,000klm.

Yes, exactly. I just sold my VL turbo with ~200,000 KM on it, 5,000 km oil change, always Mobil 1 & never caned when cold - it felt as though it had a lot of life left in the engine. That was the best bit of the car...

So I'd say stock RB turbo engines are potentially long lived, but if you boost it maybe not. But a fool can kill any engine, my mechanic once showed me a 3 year old Civic, 45,000 km & run dry of oil - full rebuild out of warranty - OUCH!

Z

Mine now has just under 180,000km (indicated) on it. Since 100k it's been running a wastegate bleed and exhaust, and since ~150k it's had the T3/4, PowerFC and a slightly raised redline (7500rpm). It's been to the drags a few times, and does see its fair share of spirited driving, but it also gets regular servicing and plenty of mechanical sympathy.

A motor that is turbo'd from the factory is engineered to be turbocharged. As someone mentioned before, this means that the entire motor is designed to take the kind of forces higher than atmospheric pressures can put on it. They're no more likely to fall apart than an NA motor.

Two points:

1) It's already been covered, but turbo engines tend to be very easy to get 'a bit' more power out of, so heaps of people do so. The problem is that commonly the ECU is left untuned, despite the stock computer often operating outside of its usual parameters.

2) Turbo engines (with the general exception of diesels) tend to be 'sporty' engines, and as such, tend to see more hard use than your average NA engine.

With similar use, I don't see why a well-maintained turbo motor couldn't last just as long as a well-maintained NA motor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...