Jump to content
SAU Community

Recommended Posts

Hi guys i probably could have posted a little earlier but, i didn't.

anyway i thought you might be interested in the results of a set of GT-SS turbos installed on a built engine.

mods as followed,

Tomei 260/9.15 cams

ported head

stainless manifolds

highflow piping (intercooler)

power fc

sard 700cc injectors

sard fuel rail

sard fuel reg

twin bocsh fuels pumps

twin fuel lines

os triple plate clutch

blitzs boost controller

splitfire coils

trust 100mm front mount

dual 3'' into single 3'' zorst

rebuilt engine with forged rods and jun pistons now 2628cc

jun oil pump

and all the other usual stuff that goes on with a complete build.

i know your all waiting for the answer but, we will be picking up the car tommorow.

as in monday.and then we have to run it in 15 psi or so for about 2000kms and then we will see what it can make.

question is how much power has been seen in australia with these turbos at the wheels in killer watts?

cheers i'll tell you what the car goes like and when it starts to boost in the next few days.

Link to comment
https://www.sau.com.au/forums/topic/50345-hks-gt-sss-installed/
Share on other sites

no you don't need the sard reg or fuel rail.

we did it as a precaution since you can lean out no. 6 cylinder with the standard fuel rail when your chasing big numbers (320KW atw or more)

just putting the injectors in and changing the intank pump will be fine for most cases.

Hi guys i probably could have posted a little earlier but, i didn't.

anyway i thought you might be interested in the results of a set of GT-SS turbos installed on a built engine.

mods as followed,

Tomei 260/9.15 cams

ported head

stainless manifolds

highflow piping (intercooler)

power fc  

sard 700cc injectors

sard fuel rail

sard fuel reg

twin bocsh fuels pumps

twin fuel lines

os triple plate clutch

blitzs boost controller

splitfire coils

trust 100mm front mount

dual 3'' into single 3'' zorst

rebuilt engine with forged rods and jun pistons now 2628cc

jun oil pump

and all the other usual stuff that goes on with a complete build.

i know your all waiting for the answer but, we will be picking up the car tommorow.

as in monday.and then we have to run it in 15 psi or so for about 2000kms and then we will see what it can make.

question is how much power has been seen in australia with these turbos at the wheels in killer watts?

cheers i'll tell you what the car goes like and when it starts to boost in the next few days.

Have ya done those 2000 kays yet???

Get that dyno graph posted!

hi fellas we got the car back dismorning.

it's running very very rich to the point were we might take it back to get it leaned up a bit.

tonight when i was following the car home it threw a couple of nice flames.

the turbos are absolutely mad they were spinning for about 35 seconds after the car had stopped.

can't wait to seee what tey start spoiling up at once there tuned.

and no the car is in such a consevative tune i have no idea what they spoil up at the moment because its so rich.

i'll post a new thead once we get some more results out of the car.

catch ya!

Well, I might just hop in on this thread and post that I got my car tuned today...

11psi - 230awkw

16psi - 260awkw

20psi - 304awkw

22psi - 316awkw

We could have turned it up more... Probably till about 24-25psi maximum before they completely run out of puff... But I'm having boost controller issues. At 11psi, it holds boost fine, but it starts to fall over at 16psi, and by 22psi, it's fluctuating 2psi from 20 to 22psi...

Once we get the boost controller sorted, it should make a teeny bit more power... But for the moment, 316.3awkw @ 20/22psi

Merli - nice one mate.

When does boost start and when do you get full boost ?

Cheers,

Hey Roy - you wanna shit yourself ?? Try 330 at the rears only - with std GTS-t brakes - last turn before EC straight - 3rd gear - 25 PSI, sideways, then overtaking a GT3, redline 4th, near redline 5th (was looking at the road), then trying to slow down for turn 1...... take turn 1 without semi slicks and a GT3 trying to overtake you !

F.M.D.

How did you find the SBC ID in your white car? Would have thought you got one of them for the GT-R!

The SBC-ID III in my white car was absolutely perfect. But I thought I'd give Aussie innovation a run and see if they can truely come up with a world-class boost controller............ Things aren't looking up for them, but I'm willing to give Turbosmart a chance to sort it out ;)

Roy: I'm happy I guess. It's what I expected, so there weren't any big surprises with the power level... They're only tiny little turbos, so I knew they'd produce power somewhere between 300-320awkw... As I said, it's what I expected. I should be able to extract around about 330awkw out of them once all boost controller issues are sorted out. More than enough for track work IMHO.

Now it's time to attack the car with weight reduction :P

B-Man: Boost starts to build IMMEDIATELY as soon as you hit the throttle from 2000rpm onwards...

As for when boost hits and peaks, I'll have to get back to you on that after the boost controller issues have been sorted out :P

Nice :P

I might be getting similar problems with my e-boost. I should show you my dyno with revs and boost plotted. Doughy thinks it might be my compressor - but i think there there is another restriction somewhere - either EBC or in the Exhaust somewhere. But that is just my gut feel. I get not more power after 21 PSI (peak power) and boost goes up to 25 psi but then comes back down to 21 - weird.

Anyway - I bet you are having fun - that's a lot of useable revs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...