Jump to content
SAU Community

Recommended Posts

If there is such a product called spray on silicon i will be try this over the weekend.

Another theory im curious about is; If the silicon is effective in insulating the spark, couldnt you use a bigger gapping as you would have a very strong spark thus more power? The reason being is reducing you gap also reduces power/kw on the dyno.

  • Replies 148
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Another theory im curious about is; If the silicon is effective in insulating the spark, couldnt you use a bigger gapping as you would have a very strong spark thus more power?  The reason being is reducing you gap also reduces power/kw on the dyno.
I've actually had a few good tuners tell me that regapping your plugs 'down' to 0.7-0.7mm is actually a work around for bad spark (bad plugs or bad coils). They both said 12psi (stock turbo/ecu) can be obtained by a good set of coils/sparkplugs.

Silcone is a good insulator, but I don't know if it will stick to the particular type of plastic the coil packs are made of.

At the plastic welding place I went to, I asked what alternatives there are to araldite, and he said possibly fibre glass (just the resin, which is also an epoxy), but nothing will stick better than araldite.

Why are you pushing for other alternatives?

In regards to gap, theoretically, yes.... you can increase your gap now for a bigger spark.

well I am going to coat my plugs in a layer of silicon (roof and gutter so it wont react with anything), and see how thats works. that should stop the spark! Iam only pushing for silicon cause araldite doesn't perform well under heat, the glue begins to get soft and sticky again, and may run!

it shouldn't.

if you look at the back of the coil pack (the tallest part), it is sealed off with an epoxy - not much different to araldite. Well this is what I was told when I took them to get plastic welded. I told the dude that temps around the coil get quite hot, and he said it wont be an issue.

Tell is if the silicone sticks, and I was told not many thinks will stick to this type of thermoplastic besides araldite. So there may be a concern of the silicone peeling off after a few weeks or so.

Hi guys,

My R32 GTR was also missing at high revs with above stock boost... I changed my plugs to Iridiums and then the problem became more apparent. I check my coils and there were two that were cracked. I've coated the coils now in "Permatex Ultra Black HI-Temp RTV silicone gasket maker" and it's look like the missing is gone in all but the highest(1.3 bar) boost setting.

I'll let you know if I have any problems.

Cheers,

Brad

My missing has been completely fixed now on both 7 and 12psi. The only problem I have now (which is the same as before the missing started) is that on 12psi it feels flat in the higher rpm's.

  • 1 month later...

I have been having some recent problems with my rb25. It seems to be popping and back firing when acceleration between 4 and 7 rpm. I have changed coil packs, spark plugs, igniter box even the coil pack loom and still no luck.

I thought it could possibly be something to do with my fuelk system as it seem sto feel like fuel cut when it happens. If anyone has come across the same problem could they please e-mail me on, [email protected] as i have done nearly everything and ready to give up.

I have read the previous replys and and not sure where exactly you are putting the epoxy glue on the pack.

Thanks, James

  • 2 weeks later...

Hi guys I have a full set of brand new splitfire coil packs for sale (cheap) for GTR, R32 or R33.

which give a heaps better performance and stops the 4000-5000 popping dead in it's tracks!

http://www.skylinesaustralia.com/forums/sh...ead.php?t=57340

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...