Jump to content
SAU Community

Recommended Posts

I just bought my car and found out with alot of research that i have this turbo in my r32 gtst skyline. my only mods when i bought the car there was a fuel regulator, 3 inch exhaust and dump pipe and and pod filter...its boosted to 15psi at the moment. Just wondering what power gains should i be reaching with this sort of turbo. Is it rated better than the HKS GT2530? i was thinking it is as its bigger. but the 2530 is smaller so it will have better low and mid range response?

Link to comment
https://www.sau.com.au/forums/topic/51282-hks-gt2835-turbo-help/
Share on other sites

power gains arent great unless u have the back up items to match. Sure its a bonus that u have this "Larger" turbo but without a front mount cooler i wouldbe winding boost down to 12-13psi, i made that mistake and im rebuilding my engine, do urself a favour, before going insearch of power, go insearch of back up systems to suit(ie computer, fuel pump etc)

Is this a better turbo than the hks GT2530? coz yeah i dont have a front mount , but i have a remapped ecu, im pretty sure i dont have a bigger fuel pump...do u guys think this is the reason why my car seems even slower and has alot of lag? coz i dont have the power system to back up this turbo?

If your car does indeed have this turbo, I suggest following the recommendations of people already and fitting a front mount asap. You should also be addressing your fuel supply issues and fitting a higher flowing fuel pump and looking at some larger injectors.

If you get these areas sorted, you should end up with a fairly tidy package

Take your car to a reputable workshop and have it checked. If I was you I wouldnt be so focused on how much power this turbo of yours might make.

I'd be confirming once and for all what you are running and checking that everything is in good order before you run into trouble.

Aybee he would get much more than that in my oppinion. The 2835 is larger and flows mopre than the 2530 and 2530 can get 200rwkw easily... My mate has his 2530 making 210rwkw @ 17psi. Should make around 230 or so?? How do these go on a RB25?

what?

so are you saying that it should make much more than 250rwkw? or around 230. cause i said that it would be good for "mid 200's" meaning around 240-260rwkw.

But thats whay ive always thought my car would be good for and its slightly more powerful than the std 2835 (420ps compared to 380ps)

Ok i have been waiting for a 2535 for a month now... not sure whats going on but aparently HKS have them on back order and cant give a definate eta. Does anyone know how the 2835 will stack up compared to the 2535? i may go bigger... is it laggy? will i need cams? ANYONE PLEASE! ps its for a RB25DET

HKS GT2535 - 340 PS Output

COMPRESSOR:

-Wheel- 56 Trim - 51.6 Inducer / 69.0 Major

-Housing- 60 Inlet / 50 Outlet - 0.60 A/R

TURBINE:

-Wheel- 76 Trim - 53.8 Major / 47.0 Exducer

-Housing- GT25/T3 inlets / Outlet specs:

Internal GT25 outlet; 0.64, 0.86 A/R

Skyline Type; 0.64 A/R

HKS GT2835 Pro S - 420 PS Output

COMPRESSOR:

-Wheel- 56 Trim - 53.1 Inducer / 71.1 Major

-Housing- 100 Inlet / 50 Outlet - 0.50 A/R

TURBINE:

-Wheel- 84 Trim - 56.5 Major / 51.8 Exducer

-Housing- T3 inlet / Outlet spec:

Internal GT-Pro; 0.68, 0.87 A/R

I'm going out on a limb here - but my guess would be that the 2835 will be laggier. (80PS Difference)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...