Jump to content
SAU Community

Recommended Posts

Hi all,

I was thinking of buying a R33 non turbo 1995 or 96 model. What are the prices im looking at for a good condition one? Im thinking around the 15,000 mark?

And has anyone had experiance with them at all, like are they a good enough car and ok power. Im just 18 and i cant have a turbo car, so this seems like a good idea,

Thanks

Link to comment
https://www.sau.com.au/forums/topic/52689-r33-gts-non-turbo/
Share on other sites

If you get one make sure it is manual no exceptions and you are only 18 so it is a very wise decision to go for non turbo.

Cheaper insurace and less hassles with turbos being made to go faster so you kill your self...........

People could say dont buy a GTS-t as they are slugs compared to GTR's but we dont, we dont drive GTR's because of cost to buy and insurance so use the same rule.

My girlfriend bought a series 2 NA auto R33... excelent condition, for 18k about a year ago.... its a very reliably car, probably about the same speed as say a holden 3.8ltre v6 (VR/VS/VT etc..) so not SLOW but not super quick...

Only thing she has spent money on is service every 5-10k 50-100$, petrol, insurance and rego...

good idea not going for a turbo car, they cost too much to maintain/mod and insurance is a killer

i got a na 33. i rekon you'll get bored of it hey. Drivin around in it looks good, but u do tend to get alotta WRX's+ other lines+ silvias+ 180sx, just abt any other sports car, wantin to drag. I got bored of my in abt 2 months. Its a great car to start with but i wouldnt be surprised if u start lookin into a turbo a couple of months after.

again... very reliable car and you should have no problems. Not uber quick, but neither are most things around that price level. 145kw isn't anything to be sneezed out, but I guess as all cars get more and more powerful over the years can start looking a bit slower in comparison. The weight will be the same as any commodore, camry, or magna out there - and that is really what you should be comparing it against. It has the sporty looks, but the practicality of many of those other cars.

I would say actually $15k is the upper end, as there is not massive demand you can get a goodie for around $12k these days.

My mate got a manual GTS4 for $14k and that was about the only car that actually looked to have a *genuine* 70,000km on it or so (no scratches, no wears in any of the trims, etc). No problems whatsoever and he is very happy with it.

you'd be better off buying a turbo in the first place. could always just turn the boost right down and pretend it's an na :)

and aren't all gts4's turbos? rb20det's...

as said above the gts are to be compared with falcons, commodores etc. on performance... however the skyline looks 100x better :)

get a Silvia really fun car

I think u cound b ok with a Turbo Silvia 2L Sr20 or get a non turbo like me As for insurances it bullshit non turbos save u money i got Quotes on Silvia Q non turbo and Silvia K Turbo differents was $30

Insurances is HIGH CAUSE it is a IMPORTED CAR not that it is Turbo

I love Sr20's there sick as I have a Mate Selling a Silvia Q club if u want me to give u his MSN or number PM me it really well looked after he just Droped a New Motor in it Same as my one Just Blue not Silver

If you are going for a NA, make sure you get a GTS25 and not the GTS, the 25 has the 2.5L RB25DE engine, 147kw/~200hp whereas the GTS has the RB20E with 100kw/~130hp of SOHC 2L power!

The GTS is very underpowered for the weight of the car, but the GTS25 is about on par with 6cyl Commodores (~150kw from memory) and is lighter.

The R33 GTS4 is essentially a GTS25 with 4wd, but a bit less power at the wheels due to drive train losses.

are the gts models eligible for import? i thought they fell under the power to weight ratio allowed by dotars.

therefore all the non turbo r33's you see driving round are rb25de's

get a gts4 then when you get bored of the N/A you can drop an rb26 into it for some awd tt fun :cheers::D;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
    • Cheers mate. Seems some people get lucky others don't. It looks like the motor was detonating (to be expected if it was overboosting I suppose) as the pistons had a lot of detonation damage, and the bearings were stuffed. The bores were very scoured too, not sure if that's from the pistons or bits of ceramic turbo. By the by now. Have been trying to avoid the rabbit hole too much on the rebuild, and there's been a few hurdles along the way, but with any luck I'll have the car back soon™. Might even pop up a thread then.  
×
×
  • Create New...