Jump to content
SAU Community

Recommended Posts

I've recently install a Stagea C34 RB25DET and a Wolf 3D v4+ into my R32 GTS4. It seemed to have a bit more mumbo than the old RB20DET, but I didn't realise until I had it mapped on the dyno today.

Early on, it was detonating it's brains, and no subtraction of timing seemed to cure it. It looked like I would be stuck with a paltry gain of only around 15 awkw (I was only getting about 130 awkw, compared with its last outing of 115 awkw with the RB20). Then we threw fuel at it, and everything started to work.

The result:

178.4 AWKW

runing 10psi, on 95 octane Caltex Vortex shyte (I'll bite the bullet and run Ultimate or Synergy in future). May not be a lot to some of you, but I'm rapt.

Link to comment
https://www.sau.com.au/forums/topic/52811-rb25det-conversion-is-now-complete/
Share on other sites

MIC, more like the R33 - doesn't have traction control, but does have VVT.

Cam - not really a drags person, but might take it to the off-streets one Friday night to see what it can do.

Great to hear Greg. From GTR comparisons that's a bit over 200rwkw so nothing wrong with that. I bet there is a big smile on the dial :cheers:

Don't break nothin' at the drags. Lets see it on track;) Pity I won't make the training day as I already booked the Maser day which is timed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...