Jump to content
SAU Community

Recommended Posts

i think the guys at holden are happy that they can make their own engine!

steve

Pff, its just a variation of an engine thats already around. As if they'd make their own.

Seriously though, if they named them the way some of you guys wanted it would be Suzuki Slow Shitbox.

Mitsubishi Death Trap

Toyota Poor Handling.

At the end of the day its just a name, and most of us would be looking at the car when buying it.. Not the name.

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

At the end of the day its just a name, and most of us would be looking at the car when buying it.. Not the name.

So are you saying you would consider buying a "Daewoo shitbox" or a "Mazda Poofmobile" if they were actually released?

I dont care how cheap the "Mazda Poofmobile" is... i aint buyin it :shake:

For those criticising the Spotivo range and similar 'add bodykit and suspension tune' cars, remember these things actually sell and there is a market for cars that are cheap to insure, cheap to buy, cheap to service (ie. they have all the benefits of a mass produced family salon), yet look a little bit better than the stocker.

Sure the names are stupid, but what do you expect? "The Toyota Camry Mildly Sporty"?

There was quite a long article about this in the Drive liftout of the Sydney Morning Herald not long ago.

LW.

Hahahaaa, that's OK, I just a chick in the most gayest, riced - up, piece of crap Mitsubishi Charade with the fattest, most crap body kit, lowered to the sh_t, with Ralliart stickers all over it, try to drag me!!!!!!!!!!!!!!!!!!! Only a **** brain would buy a car and think it goes fast because they have a badge / sticker on it that says something special!!!!!! AAAGGGHHH :P

yeh, those Mitsubishi lancer with Evo body kits on always think themselves are actually drving a Evo, esp those with bolt on turbo~.~ :shake: but they still enjoy drag with u at traffic light even they are far eating smoke behind :Pimp2:

So are you saying you would consider buying a "Daewoo shitbox" or a "Mazda Poofmobile" if they were actually released?

I dont care how cheap the "Mazda Poofmobile" is... i aint buyin it  :shake:

No, I'm saying thats what would happen if thats what you guys wanted them to be honest and not care about sales.

They (car manufacturers) Have to make it sound half reasonable or else nobodies going to buy it.

oh and i also hate how people use the "GT" or "GTR" letter shit cars.

steve

um GT = Grand Touring... it was around loooooooong before the term "GTR" was termed... termed by the Germans as well... not the Japs :D bit of trivia for ya skanky ass :D

Try the Mitsubishi Mum or the Suzuki Afternoon Tea

Whats wrong with the Mitsubishi mum... i think thats a good name. She's a big 500cc mumma, plenty of power on tap with 30 hp. Good looks & aerodynamic design. & She'll always look after you coz she's ya mum. Does your mum have 30 hp? No... i didnt think so.

http://www.conceptcarz.com/folder/vehicle....endingApproval=

mitsubishi-mum.jpg

:D

Since *quite* a few of the Aust. Public are tainted by the idea that performance is based upon and proportional to how many litres an engine has.. perhaps one day much like AMD has done with naming it’s CPU’s virtual speed instead of clock cycles.. the Holden Astra Sri turbo will be rebadged 4L instead of its actual capacity of 2L (since loosely – a standard turbo can be translated into doubling the capacity of the engine). I wouldn’t put it past Holden.. nor the public snapping them up unawares, considering the mount of Camery ‘sports’ I see on the street

:confused: 626 wagon > stagea? wtf please explain

the 80's were pretty good for starting some pretty ghey car models like the mazda 323 shades. should have been the mazda 323 nana can you see a young person with those sick louvres on their car? or the nissan pulsar reebok. nissan must have thought they would sell by association hmm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...