Jump to content
SAU Community

Recommended Posts

Spotted Theo's AXIS on the hoist at the Penriff choice A-one Stagea bro happy times workshop last night.

I hope he didn't put the suction pipe on because he will be pulling it back off for the actuator!!!!

I hope he didn't put the suction pipe on because he will be pulling it back off for the actuator!!!!

nope its getting ceramic coated first :D

spotted you today Dale at 4pm on York Rd :P i was in the work BRICK lol

I hope he didn't put the suction pipe on because he will be pulling it back off for the actuator!!!!

Lol, with mine; you can actually get the actuator out without removing it. ;)

nope its getting ceramic coated first :D

spotted you today Dale at 4pm on York Rd :P i was in the work BRICK lol

Sneaky! Didn't even know; hope I wan't picking my nose... :woot:

Base coat is going on tonight, along with some parts for the Makinnen.

Turbo is off, exhaust housing is getting coated, new Meek performance dump, and X-force full system going on.

Full hard piping kit, and a Walbro going in tomorrow. In a month or so it's getting a Quaife front LSD, and going for a power fc tune.

Turbo is off, exhaust housing is getting coated, new Meek performance dump, and X-force full system going on.

Full hard piping kit, and a Walbro going in tomorrow. In a month or so it's getting a Quaife front LSD, and going for a power fc tune.

power FC?

hmm interesting!

Possibly should clarify; the TME that I was referring to, sadly doesn't belong to me. It's a car in my mates workshop that is getting some love.

I wish it did; but fitting up a bunch of sexy bits to someone else's car is going to have to do for now.

Wasn't finished in time for me to see it run today unfortunately. It's going to be a hell of a thing though.

Spotted again a black C34 S2 Stagea with black mags on Yass Rd Queanbeyan NSW yesterday (15 Aug) at about 0830. SA plates - must be more than just visiting as I saw it in the same spot a few weeks ago.

saw the yellow rs4s aswell, passed on reservior rd, i gave a wave and revieved one back, i was in my silver c34 s2.

cheers.

Wow i got seen alot this trip. Ur S2 looks sweet. I wish mine wasnt so dirty. Also spotted the 2 white S2's, a white m35, a gold m35 and a silver m35. All in and around WTAC.

Wow i got seen alot this trip. Ur S2 looks sweet. I wish mine wasnt so dirty. Also spotted the 2 white S2's, a white m35, a gold m35 and a silver m35. All in and around WTAC.

I think u had parked near mine on the Saturday at the start of the drifts till I left. Little higher up the hill nd a row or two closer to the final turn. Mine had all the stickers nf was 2nd in from the track

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
    • Plazmaman 76mm Pro Series, done. Data to back it up, I posted up somewhere here a few years back
×
×
  • Create New...