Jump to content
SAU Community

Recommended Posts

I was wondering does anyone know of the most powerfull RB25DET in Australia or even some very powerfull ones in japan etc, Has to still be 2.5 L doesnt matter what engine mods internal bolt ons, just after some recorded figures maybe dyno sheets or info from mags, just lookin to see who owns the record, thanks heaps for the help

Keep on boostin :P

Link to comment
https://www.sau.com.au/forums/topic/54068-most-powerfull-rb25det/
Share on other sites

Theirs lots of potential out their.

Just a couple off the top of my head,

OBHVE R33 - 386rwkw's 518hp

JMS R33 - 448rwkw's 601hp

Twin turbo RB25 Silvia - 355kw's

A fair few guys on here have 300kw + GTS-T With RB25's in them some with aftermarket internals some with standard internals.

Im sure theirs more powerful RB25 engines than above that havn't been seen to the public. :) It also comes down to $$$ aswel :)

But at the end of the day horsepower figures will only tell the truth on the 1/4 mile.

:)

Jun

From the thread:

MOD LIST:

- NEO RB25 (year 98+)

-Greddy intake plenum

-75mm mustang throttle (to be upgraded by a 83mm infiniti one)

-Greddy Type R S14 intercooler with 3in. piping

-custom exhaust header (ceramic coated)

-Presicion Turbo T-67 (front polished, rear ceramic coated)

front: .70ar with a 66 turbine

Rear: .69ar with a P trim turbine

-Turbonetics racegate

-HKS blow-off valve

-850cc injectors

-aeromotive fuel press. regulator

- Walboro 255 in-tank fuel pump

- Fuel canister (to maintain fuel volumen)

-Bosch porsche fuel pump ( after the canister)

-custom fuel rail

-Rb25 stock tranny

-exedy dual disk cluth

-nismo differential

-3in down pipe and 3in exhaust (no cat.)

-Microtech fuel injection computerEngine is totaly stock internals, for the exeption now of a power enterprise head gasket and ARP head studs.

587HP @ 26psi

I need more convincing that what is in that thread :)

Having said that and a bit of research on this Turbo

(look here: http://www.precisionturbo.net/turbocharger...ategory_id=3027)

The Presision T-67 is rated at 780HP

Thats one big F'off turbo.

That'd be one laggy ho

the jms R33 448rwkw was a dyno failure, the car actually did around 380rwkw with racing juice and low 300rwkw with pump. I saw it got tune again and run after 1,2 weeks after the autosalon.

yeah, always have to be careful of dyno figures, especially from "workshop" cars funnily enough.

anywhere from 250-300rwkw is fairly "standard" these days... quite a few getting around australia with these figures.. .could probably name about 10 on here with those figures alone :)

The question is - what fails first? and what are the inherent weaknesses when pushing past 300rwkw ?

i got 420rwhp of an rb25 using a gt35 with pistons as only internal upgrade, as for bolt on the list starts here and goes to over ---------------> there, but it did lasted for a fairwhile until i drove a true 800+ hp rb26 monster.

This isn't meant to sound provocative, but I am tired so I apologise in advance if it does sound that way.

near anything an RB26 can do an RB25 can also.

Is that really saying much though? Throw enough money at most half-decent engines are you can extract significant power.

How does it break down in terms of bang-for-buck (ignoring initial purchase price)? Surely the RB26 starts with an advantage?

LW.

ive got a mate with a neo6 in a 180, its currently making 290rwkw detuned. if he ever gets it finished ill post the end figure up. yet to come is bigger fuel lines (still using stock s13) bigger throttle body and cams. no point in posting what is expected so ill wait till it makes the power befor saying anything else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...