Jump to content
SAU Community

Recommended Posts

34T is perfect, nice one.

Im getting some new plates too, same letters black and white plastic, slim front. It was the cheapest option.

But still will look ok.

Yeah I always liked my black and white plates.

Sucks that they were not issued by ACT and were the reason behind my defect :(

Those plates may not be as cheap as you think.

I'm pretty sure if you want standard issue plates that are not in sequence, they will cost around the $450 mark.

eg. I was looking at getting YKS-33R for the 4door and that was the approx quoted price. :/

Replacement of plates Fee
Replacing your plates with a tin Y series plate (from stock available in
Canberra Connect Shopfront)
(registration on vehicle must be current)
$37.80

If not in stock would be the Extra cost I was referring to but I am going to look into it again.

Id think $500 is about what that costs. $2500 for custom. The price goes up quite quickly.

When i was there (belco) it was cheapest to get the same plate re-made ($160). A new number costs more because of the paperwork.

Plastic isnt any more expensive, its when you want custom letters the price gets crazy.

So... polishing pads alll cost about the same $20-$25, some real nice ones are $40.

Thing is you can get a professional one for $22 which lasts for ages, or a bit of mattress foam at Supercheap for $25 which will sht itself very quickly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...