Jump to content
SAU Community

Recommended Posts

All,

Well after a 5 month long winded process the GTR is finally here, any you guessed it, its time for MODS!

The Vspec II and correct me if im wrong already has the following upgrades. Carbon bonnet and diffuser. Larger exhaust housing on the turbo's, slightly upgraded oil & water pump (An extra fin I have been told), larger rear brakes, more aggressive suspension (Lower and harder).

After Market, it already has HKS pods, 3 1/2 zorst, header pipes, twin plate ceramic clutch and magnesium wheels.

My thought on upgrades are as follows.

HKS GTSS turbo’s

HKS dumps

7.5lt cat

POMCAM's 264 stage 1 drop in's

PFC

Blitz dual solenoid boost kit

600cc Inj

Oil cooler

sump baffle

Surge protector

Metal head gasket.

Im basically ready to buy the parts so let me know your thoughts.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/55308-now-its-time-for-mods-no-the-new-r34/
Share on other sites

Carlo,

I think Im happy with the STD PFC and I was never happy with my old Apexi PFC Boost kit.

Red,

I cant fit the fluro's under the car, the carbon fibre under bady is in the way, Damm!

how about some Tomei cam gears??

the Normal V Specs also have the carbon fibre diffuser as well... don't know if the 2's had a different design but I'd be surprised if it did. The 2 also has an electronically controlled rear diff

also the bonnets have the small vent in them on the passenger side from factory... didn't think they were carbon fibre though???

how about some Tomei cam gears??

the Normal V Specs also have the carbon fibre diffuser as well... don't know if the 2's had a different design but I'd be surprised if it did. The 2 also has an electronically controlled rear diff

also the bonnets have the small vent in them on the passenger side from factory... didn't think they were carbon fibre though???

Yeah mine has the carbon rear-diffuser and electronic rear diff as well. Don't know if either of them changed for the V2.

GTR bonnets are aluminium until the V-SpecII which is carbon fibre. The M-Spec goes back to aluminium but probably had a CF option.

GTR-Boy,

Im looking for two things, a 4 ft tall sticker that says RICE. I want to put it the R on the boot IC on the roof and the E on the bonnet. I also need a green fluro under the car that spells "IM a Spanka" do you think you can source them?

Keep up the good work!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...