Jump to content
SAU Community

Recommended Posts

  • Replies 237
  • Created
  • Last Reply

Top Posters In This Topic

Nice effort Tristan, for a street car that's more than enough power - especially in a 2WD.

That dyno mpg shows a few things which have been a source of questions though. I can recall Paul or Steve saying that the reason why intake temps are so high on their dyno is due to the fact they run it with the bonnet shut. That run clearly shows the bonnet open, and if you look on the dyno sheet it shows the intake temp up at 63 degrees.

To the best of my understanding, all dyno's record an uncorrected level of torque, then reference that to RPM and calculate power. After that primary calc is done it then factors in the correction, which is based on humidity, temperature and altitude. I know that's a basic rundown of the whole she-bang but for the sake of this arguement it will do.

If you run those weather conditions through a dyno correction calculation it actually multiples the amount of power recorded, mainly due to the extremely high intake temps. Hang on will do the math and post the actual correction factor.

So just a quick question - where is the intake temp probe situated?

Don't be hasty and think I'm having a go at the car, it's owner, the workshop, your pet etc. I'm more interested in the correct way to extrapolate consistent data from a dyno, moreso than what is currently being shown.

Attachment of the graph: http://www.skylinesaustralia.com/forums/at...achmentid=25240

LOL...for gods sake you are in a workshop...take the tie off:) i flinched when i thought you were about to lean over the engine bay, i have weak nerves so pls dont lean over a running engine with your tie on :)

Seems to come onto boost nice and hard....what boost was the thing running?

LOL...for gods sake you are in a workshop...take the tie off:)  i flinched when i thought you were about to lean over the engine bay, i have weak nerves so pls dont lean over a running engine with your tie on :)

Seems to come onto boost nice and hard....what boost was the thing running?

I too cringed like a little girl when i saw dude in tie lean over the engine bay!!

I'm over the whole scene of this 511 hp stock injectors car cr*p. Until someone post up a mph that reflects the representation of the claimed hp. So until then it's still a claimed effort , and i'm claiming mine to have 900hp atw, and i'll post the dyno sheet tonight, But don't hold your breath on that one either.

hungry6 your a tosser. In the other thread tristan said that the 511 was an overinflated figure. If you watched the video, youd see it shows 438rwhp, which is the CORRECT figure. And yes on STOCK injectors. So take you 900rwhp dream machine and fly elsewhere, when you actually have a car worth posting about, then dish out on others...

tosser

josh

be nice everyone. Im not going to be nice this time :)

boost seems to come on like a hammer!

My car is sooo nice and progressive with my GT30 compared to that, very savage!

tough to drive on the street?

Doughboy. the air probe is right in front of the compressor housing, my air filter is causing a minor restriction so i took it off before the dyno run.

Roy. Peak power the turbo is running 18psi

sorry dave wont wear a tie next time.

Crack. about 6500rpm to get that figure

Hungry6. . <- you

D1 RX7. nice bit of chop dished there.

r31nismoid. you dont have to pump the clutch to get it to break traction, your coming to perth, you can have a drive.

tristan

']hungry6 your a tosser. In the other thread tristan said that the 511 was an overinflated figure. If you watched the video, youd see it shows 438rwhp, which is the CORRECT figure. And yes on STOCK injectors. So take you 900rwhp dream machine and fly elsewhere, when you actually have a car worth posting about, then dish out on others...

tosser

josh

Then why did he topic this thread with 511 rwhp?

There is only one tosser here and it aint hungry6

Prolly shootout mode which is made to compensate for inconsistensies on the day of the dyno run.Correct me if i am wrong.

You are wrong.

The 511hp was made at Perth Auto Salon using a hub dyno.

Autosalon figures should be taken with a large grain of salt, cuz in the end, their only purpose is to put on a show.

The 438hp was on a dyno dynamics dyno in shootout mode. Which is a fairer representation of the cars true power. Since Dyno Dynamics dynos are widely used when comparing HP figures.

The first thread said 511rwhp on stock injectors, people questioned the figure and wanted to know how it could be done on stock injectors.

It was then acknowledged by the workshop in question that 511rwhp was a BS figure and the cars true power was ~450hp, which has been shown on the recent dyno.

This whole debarcle is over a big HP figure being made on stock injectors, people questioning how it can be done on stock injectors and other people not telling how it was made.

I'm just here to enjoy the resulting show :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...